Refrigerated cleanroom pass box with insulated stainless chamber and top cooling module

Peralatan Dekontaminasi Kakitangan dan Bahan

Kotak Pas Cleanroom yang disejukkan

An insulated, temperature-controlled pass box for short transfers of compatible temperature-sensitive materials.

Insulated Cold Chamber
Programmable Temperature Control
Condensation Drain
Interlocked Cold-Transfer Doors

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The refrigerated pass box combines a double-wall insulated stainless chamber with a compact refrigeration module and internal air circulation. The controller holds the selected short-transfer setpoint while a drain removes evaporator condensate. Both doors remain interlocked to preserve the controlled material route; the equipment is intended for transfer rather than long-term product storage.

Ciri-ciri Utama

An insulated chamber reduces heat gain during the transfer sequence.

The refrigeration controller maintains the selected operating setpoint.

An internal fan circulates conditioned air around the payload.

A drain route removes moisture from the evaporator section.

Removable shelves allow cleaning and load arrangement.

Kebimbangan Produk Pelanggan

Cold transfer must hold a suitable temperature briefly without condensation, door conflict or misuse as long-term storage.

A conventional pass box exposes chilled samples to warm room air.An insulated refrigerated chamber maintains the selected transfer environment.

Condensation drips into the cleanroom wall or chamber.The evaporator section includes a defined condensate drain connection.

Repeated door opening causes rapid temperature swings.Interlocks permit only one door at a time and the controller restores the setpoint after transfer.

Large shelf systems block cold-air circulation.Removable open racks are arranged to leave an air path around the load.

Permohonan yang biasa

Temperature-sensitive sample transferPharmacy preparation supportBiotechnology materialsCold-chain component staging

Parameter teknikal

Representative construction ranges for a refrigerated cleanroom pass box are shown below.

Bahan Teras	SUS 304 or SUS 316L insulated chamber with closed-loop refrigeration module, circulation fan and condensate drain
Ketebalan Panel	60-100 mm insulated double-wall cold-chamber panels
Lebar berkesan	400-1000 mm clear refrigerated transfer width
Panjang maksimum	Up to 1200 mm chamber depth
Keluli Menghadapi Ketebalan	1.0-1.5 mm menghadap keluli tahan karat
Ketumpatan teras	35-40 kg/m³ polyurethane foam insulation
Kekonduksian Terma	0.022-0.028 W/(m·K) for polyurethane thermal insulation
Kemasan permukaan	Brushed stainless steel with removable shelf racks and cleanable evaporator cover
Jenis Bersatu	Continuous-seam insulated chamber with gasketed interlocked doors and sealed condensate connection
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Typical 5-15 °C setpoint rangeDigital temperature displayAlarm contactRemovable stainless shelf rack

Planning a Refrigerated Cleanroom Pass Box specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami