Complete phenolic foam cleanroom sandwich panel with metal facings

Sistem Dinding dan Langit-langit Cleanroom

Panel Sandwich Phenolic Foam Cleanroom

A compact insulated cleanroom panel using rigid phenolic foam between coated steel facings, selected where low thermal conductivity, reduced smoke generation and a thinner enclosure build-up are important.

Rigid Phenolic Foam Core
Konduktivitas Termal yang Rendah
Compact Insulation Thickness
Smooth Hygienic Facings

Permintaan untuk kutipan Browse Produk

Perkenalan produk

Phenolic Foam Cleanroom Sandwich Panels use a rigid thermoset foam core bonded between smooth metal skins. The fine closed-cell structure offers strong insulation at modest thickness and phenolic chemistry is known for comparatively low smoke production among rigid organic foams. Because phenolic foam is more brittle than PU or PIR, protected edges and controlled handling are especially important. When fully enclosed and accurately bonded, the panel provides a lightweight insulated wall or ceiling for controlled-temperature rooms where space efficiency is a major design consideration.

Fitur utama:

Fine closed cells provide efficient thermal resistance in a compact panel depth.

Thermoset phenolic chemistry offers improved heat and smoke behavior compared with standard polystyrene foam.

Low core density keeps the completed enclosure light and easy to assemble.

Continuous steel facings protect the brittle foam from routine contact and cleaning.

Closed joint profiles maintain insulation continuity along the wall or ceiling line.

Kekhawatiran produk pelanggan

The main purchasing concerns are brittle core edges, bond integrity, moisture protection and compatibility with service openings.

Phenolic foam can fracture at an unprotected edge during rough handling.Full perimeter closures and rigid packaging shield the core until the panel is installed.

Poor adhesive coverage can allow a brittle core to separate from the skin.Uniform lamination pressure and controlled adhesive application maintain full-face bonding.

Site-cut holes expose foam and create weak, irregular edges.Openings are factory prepared and finished with closed profiles before delivery.

Condensation at a discontinuous joint can bypass the high-performance insulation.Interlocking edges and continuous sealing preserve the thermal layer between panels.

Aplikasi yang Tipis

Temperature-controlled laboratoriesPharmaceutical storage and preparation roomsCompact cleanroom partitionsFood and biotechnology process areasInsulated cleanroom ceiling zones

Parameter teknis

Typical manufacturing ranges for phenolic foam cleanroom panels are listed below.

Bahan inti	Rigid closed-cell phenolic foam
Ketebalan Panel (Panel Thickness)	40, 50, 75 or 100 mm
Efektif lebar	950 atau 1150 mm
Panjang maksimum	6000 mm ZXQ000003
Baja menghadap ketebalan	0,40 - 0,60 mm
Kepadatan inti (core density)	35–60 kg/m³
Konduktivitas Termal (Thermal Conductivity)	0.020–0.025 W/(m·K)
Permukaan selesai	Polyester- or PVDF-coated galvanized steel
Jenis Bersama	Concealed tongue-and-groove joint with sealed core edge
Customization (Kustomisasi)	A Tersedia berdasarkan aplikasi dan lingkungan operasi yang dimaksudkan

Pilihan yang tersedia

Alternative foam densityStainless steel process-side faceReinforced cut-out blocksCustom insulation thickness

Planning a Phenolic Foam Cleanroom Sandwich Panel specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami