Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Cleanroom mur et systèmes de plafond
Panneau Sandwich de salle blanche phénolique
A compact insulated cleanroom panel using rigid phenolic foam between coated steel facings, selected where low thermal conductivity, reduced smoke generation and a thinner enclosure build-up are important.
- Rigid Phenolic Foam Core
- Faible conductivité thermique
- Compact Insulation Thickness
- Smooth Hygienic Facings
Introduction de produit
Phenolic Foam Cleanroom Sandwich Panels use a rigid thermoset foam core bonded between smooth metal skins. The fine closed-cell structure offers strong insulation at modest thickness and phenolic chemistry is known for comparatively low smoke production among rigid organic foams. Because phenolic foam is more brittle than PU or PIR, protected edges and controlled handling are especially important. When fully enclosed and accurately bonded, the panel provides a lightweight insulated wall or ceiling for controlled-temperature rooms where space efficiency is a major design consideration.
Key Features
Thermoset phenolic chemistry offers improved heat and smoke behavior compared with standard polystyrene foam.
Low core density keeps the completed enclosure light and easy to assemble.
Continuous steel facings protect the brittle foam from routine contact and cleaning.
Closed joint profiles maintain insulation continuity along the wall or ceiling line.
Préoccupations du client produit
The main purchasing concerns are brittle core edges, bond integrity, moisture protection and compatibility with service openings.
Phenolic foam can fracture at an unprotected edge during rough handling.Full perimeter closures and rigid packaging shield the core until the panel is installed.
Poor adhesive coverage can allow a brittle core to separate from the skin.Uniform lamination pressure and controlled adhesive application maintain full-face bonding.
Site-cut holes expose foam and create weak, irregular edges.Openings are factory prepared and finished with closed profiles before delivery.
Condensation at a discontinuous joint can bypass the high-performance insulation.Interlocking edges and continuous sealing preserve the thermal layer between panels.
Les applications typiques
Temperature-controlled laboratoriesPharmaceutical storage and preparation roomsCompact cleanroom partitionsFood and biotechnology process areasInsulated cleanroom ceiling zones
Paramètres techniques
Typical manufacturing ranges for phenolic foam cleanroom panels are listed below.
| Matériaux de base | Rigid closed-cell phenolic foam |
|---|---|
| Panneau épaisseur | 40, 50, 75 or 100 mm |
| Largeur effective | 950 ou 1150 mm |
| Longueur maximale | 6000 mm |
| Acier face épaisseur | 0,40 - 0,60 mm |
| Densité Core | 35–60 kg/m³ |
| Conductivité thermique | 0.020–0.025 W/(m·K) |
| surface finie | Polyester- or PVDF-coated galvanized steel |
| Type joint | Concealed tongue-and-groove joint with sealed core edge |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation |
Options disponibles
Alternative foam densityStainless steel process-side faceReinforced cut-out blocksCustom insulation thickness
Planning a Phenolic Foam Cleanroom Sandwich Panel specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
