Neoprene flexible duct connector with black fabric between galvanized edges

Sistem Distribusi Udara Cleanroom

Konektor Saluran Fleksibel Neoprene

An airtight metal-to-fabric-to-metal connector that interrupts vibration transmission between fans, air-handling equipment and rigid ductwork.

Vibration-Isolating Fabric
Airtight Double-Lock Seams
Galvanized Metal Edges
Oil and Moisture Resistant

Permintaan untuk kutipan Browse Produk

Perkenalan produk

A neoprene flexible duct connector places a coated woven fabric strip between two galvanized sheet-metal edges. One metal edge is formed into the equipment transition and the other into the connected duct, leaving the fabric free to flex without carrying rigid vibration. The polychloroprene-coated fiberglass fabric resists moisture, weathering and many oils encountered in plant rooms. Factory double-lock seams hold the fabric evenly and avoid exposed punctures through the active flexible width.

Fitur utama:

The compliant neoprene strip breaks the solid metal path that transmits fan and blower vibration.

Woven fiberglass reinforcement controls fabric stretch under alternating positive and negative pressure.

Factory double-lock seams capture the coated fabric without field stitching or loose fasteners.

Galvanized metal edges integrate directly into rectangular or round sheet-metal transitions.

Kekhawatiran produk pelanggan

A flexible connector must move freely while remaining airtight; excess tension, sag or misalignment can turn the fabric into a load-bearing duct component.

Fan vibration travels through rigid ductwork into occupied clean spaces.The reinforced elastomer fabric interrupts the metal path adjacent to the equipment.

An undersized fabric width is pulled tight when the fan starts.Adequate exposed width and neutral alignment preserve movement in every operating mode.

Field screws puncture the active fabric and create leakage points.Factory metal-to-fabric lock seams keep fasteners outside the flexible center section.

Oil mist or humid air degrades a general-purpose canvas strip.Polychloroprene-coated fiberglass provides stronger moisture and oil resistance for plant-room duty.

Aplikasi yang Tipis

Air-handling-unit connectionsSupply and exhaust fan outletsFan-coil and terminal-unit connectionsVibration-isolated plenumsPump-room and laboratory exhaust equipment

Parameter teknis

Typical construction data for factory-seamed neoprene flexible duct connector are listed below.

Bahan inti	Woven fiberglass fabric double-coated with polychloroprene
Ketebalan Panel (Panel Thickness)	0.60–0.75 mm coated fabric
Efektif lebar	75–150 mm exposed flexible fabric width
Panjang maksimum	30000 mm supplied coil length
Baja menghadap ketebalan	0.45–0.60 mm galvanized steel edge strips
Kepadatan inti (core density)	Approximately 1000–1100 kg/m³ polychloroprene compound
Konduktivitas Termal (Thermal Conductivity)	Approximately 0.20–0.25 W/(m·K) for coated elastomer fabric
Permukaan selesai	Black neoprene coating with bright galvanized steel edges
Jenis Bersama	Factory double-lock metal-to-fabric seam; formed or flanged metal duct connection
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Neoprene, silicone or PTFE-coated fabricGalvanized, aluminum or stainless metal edges75–150 mm active fabric widthStraight coil or prefabricated rectangular connector

Planning a Neoprene Flexible Duct Connector specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami