Neoprene flexible duct connector with black fabric between galvanized edges

클린룸 공기 분배 시스템

네오프렌 유연성 덕트 커넥터

An airtight metal-to-fabric-to-metal connector that interrupts vibration transmission between fans, air-handling equipment and rigid ductwork.

Vibration-Isolating Fabric
Airtight Double-Lock Seams
Galvanized Metal Edges
Oil and Moisture Resistant

견적 요청 제품 찾아보기

상품 소개

A neoprene flexible duct connector places a coated woven fabric strip between two galvanized sheet-metal edges. One metal edge is formed into the equipment transition and the other into the connected duct, leaving the fabric free to flex without carrying rigid vibration. The polychloroprene-coated fiberglass fabric resists moisture, weathering and many oils encountered in plant rooms. Factory double-lock seams hold the fabric evenly and avoid exposed punctures through the active flexible width.

주요 기능

The compliant neoprene strip breaks the solid metal path that transmits fan and blower vibration.

Woven fiberglass reinforcement controls fabric stretch under alternating positive and negative pressure.

Factory double-lock seams capture the coated fabric without field stitching or loose fasteners.

Galvanized metal edges integrate directly into rectangular or round sheet-metal transitions.

고객 제품 관심사

A flexible connector must move freely while remaining airtight; excess tension, sag or misalignment can turn the fabric into a load-bearing duct component.

Fan vibration travels through rigid ductwork into occupied clean spaces.The reinforced elastomer fabric interrupts the metal path adjacent to the equipment.

An undersized fabric width is pulled tight when the fan starts.Adequate exposed width and neutral alignment preserve movement in every operating mode.

Field screws puncture the active fabric and create leakage points.Factory metal-to-fabric lock seams keep fasteners outside the flexible center section.

Oil mist or humid air degrades a general-purpose canvas strip.Polychloroprene-coated fiberglass provides stronger moisture and oil resistance for plant-room duty.

일반적인 응용 프로그램

Air-handling-unit connectionsSupply and exhaust fan outletsFan-coil and terminal-unit connectionsVibration-isolated plenumsPump-room and laboratory exhaust equipment

기술 매개변수

Typical construction data for factory-seamed neoprene flexible duct connector are listed below.

핵심 재료	Woven fiberglass fabric double-coated with polychloroprene
패널 두께	0.60–0.75 mm coated fabric
유효 폭	75–150 mm exposed flexible fabric width
최대 길이	30000 mm supplied coil length
강철 면면 두께	0.45–0.60 mm galvanized steel edge strips
코어 밀도	Approximately 1000–1100 kg/m³ polychloroprene compound
열전도도 (Thermal Conductivity)	Approximately 0.20–0.25 W/(m·K) for coated elastomer fabric
표면 마무리	Black neoprene coating with bright galvanized steel edges
접합 유형	Factory double-lock metal-to-fabric seam; formed or flanged metal duct connection
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Neoprene, silicone or PTFE-coated fabricGalvanized, aluminum or stainless metal edges75–150 mm active fabric widthStraight coil or prefabricated rectangular connector

Planning a Neoprene Flexible Duct Connector specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.