Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Systèmes de distribution d'air Cleanroom
Neoprene connecteur de conduit flexible Porte d'accès à conduit
An airtight metal-to-fabric-to-metal connector that interrupts vibration transmission between fans, air-handling equipment and rigid ductwork.
- Vibration-Isolating Fabric
- Airtight Double-Lock Seams
- Galvanized Metal Edges
- Oil and Moisture Resistant
Introduction de produit
A neoprene flexible duct connector places a coated woven fabric strip between two galvanized sheet-metal edges. One metal edge is formed into the equipment transition and the other into the connected duct, leaving the fabric free to flex without carrying rigid vibration. The polychloroprene-coated fiberglass fabric resists moisture, weathering and many oils encountered in plant rooms. Factory double-lock seams hold the fabric evenly and avoid exposed punctures through the active flexible width.
Key Features
Woven fiberglass reinforcement controls fabric stretch under alternating positive and negative pressure.
Factory double-lock seams capture the coated fabric without field stitching or loose fasteners.
Galvanized metal edges integrate directly into rectangular or round sheet-metal transitions.
Préoccupations du client produit
A flexible connector must move freely while remaining airtight; excess tension, sag or misalignment can turn the fabric into a load-bearing duct component.
Fan vibration travels through rigid ductwork into occupied clean spaces.The reinforced elastomer fabric interrupts the metal path adjacent to the equipment.
An undersized fabric width is pulled tight when the fan starts.Adequate exposed width and neutral alignment preserve movement in every operating mode.
Field screws puncture the active fabric and create leakage points.Factory metal-to-fabric lock seams keep fasteners outside the flexible center section.
Oil mist or humid air degrades a general-purpose canvas strip.Polychloroprene-coated fiberglass provides stronger moisture and oil resistance for plant-room duty.
Les applications typiques
Air-handling-unit connectionsSupply and exhaust fan outletsFan-coil and terminal-unit connectionsVibration-isolated plenumsPump-room and laboratory exhaust equipment
Paramètres techniques
Typical construction data for factory-seamed neoprene flexible duct connector are listed below.
| Matériaux de base | Woven fiberglass fabric double-coated with polychloroprene |
|---|---|
| Panneau épaisseur | 0.60–0.75 mm coated fabric |
| Largeur effective | 75–150 mm exposed flexible fabric width |
| Longueur maximale | 30000 mm supplied coil length |
| Acier face épaisseur | 0.45–0.60 mm galvanized steel edge strips |
| Densité Core | Approximately 1000–1100 kg/m³ polychloroprene compound |
| Conductivité thermique | Approximately 0.20–0.25 W/(m·K) for coated elastomer fabric |
| surface finie | Black neoprene coating with bright galvanized steel edges |
| Type joint | Factory double-lock metal-to-fabric seam; formed or flanged metal duct connection |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Neoprene, silicone or PTFE-coated fabricGalvanized, aluminum or stainless metal edges75–150 mm active fabric widthStraight coil or prefabricated rectangular connector
Planning a Neoprene Flexible Duct Connector specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
