Neoprene flexible duct connector with black fabric between galvanized edges

Sistem Pengedaran Udara Bilik Bersih

Penyambung Saluran Fleksibel Neoprena

An airtight metal-to-fabric-to-metal connector that interrupts vibration transmission between fans, air-handling equipment and rigid ductwork.

Vibration-Isolating Fabric
Airtight Double-Lock Seams
Galvanized Metal Edges
Oil and Moisture Resistant

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

A neoprene flexible duct connector places a coated woven fabric strip between two galvanized sheet-metal edges. One metal edge is formed into the equipment transition and the other into the connected duct, leaving the fabric free to flex without carrying rigid vibration. The polychloroprene-coated fiberglass fabric resists moisture, weathering and many oils encountered in plant rooms. Factory double-lock seams hold the fabric evenly and avoid exposed punctures through the active flexible width.

Ciri-ciri Utama

The compliant neoprene strip breaks the solid metal path that transmits fan and blower vibration.

Woven fiberglass reinforcement controls fabric stretch under alternating positive and negative pressure.

Factory double-lock seams capture the coated fabric without field stitching or loose fasteners.

Galvanized metal edges integrate directly into rectangular or round sheet-metal transitions.

Kebimbangan Produk Pelanggan

A flexible connector must move freely while remaining airtight; excess tension, sag or misalignment can turn the fabric into a load-bearing duct component.

Fan vibration travels through rigid ductwork into occupied clean spaces.The reinforced elastomer fabric interrupts the metal path adjacent to the equipment.

An undersized fabric width is pulled tight when the fan starts.Adequate exposed width and neutral alignment preserve movement in every operating mode.

Field screws puncture the active fabric and create leakage points.Factory metal-to-fabric lock seams keep fasteners outside the flexible center section.

Oil mist or humid air degrades a general-purpose canvas strip.Polychloroprene-coated fiberglass provides stronger moisture and oil resistance for plant-room duty.

Permohonan yang biasa

Air-handling-unit connectionsSupply and exhaust fan outletsFan-coil and terminal-unit connectionsVibration-isolated plenumsPump-room and laboratory exhaust equipment

Parameter teknikal

Typical construction data for factory-seamed neoprene flexible duct connector are listed below.

Bahan Teras	Woven fiberglass fabric double-coated with polychloroprene
Ketebalan Panel	0.60–0.75 mm coated fabric
Lebar berkesan	75–150 mm exposed flexible fabric width
Panjang maksimum	30000 mm supplied coil length
Keluli Menghadapi Ketebalan	0.45–0.60 mm galvanized steel edge strips
Ketumpatan teras	Approximately 1000–1100 kg/m³ polychloroprene compound
Kekonduksian Terma	Approximately 0.20–0.25 W/(m·K) for coated elastomer fabric
Kemasan permukaan	Black neoprene coating with bright galvanized steel edges
Jenis Bersatu	Factory double-lock metal-to-fabric seam; formed or flanged metal duct connection
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Neoprene, silicone or PTFE-coated fabricGalvanized, aluminum or stainless metal edges75–150 mm active fabric widthStraight coil or prefabricated rectangular connector

Planning a Neoprene Flexible Duct Connector specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami