Pemasok One-Stop Anda untuk Peralatan Cleanroom dan Fasilitas Aseptik EsensialDukungan proyek internasional
Open mobile navigationClose mobile navigation
Beranda / Produk / Cleanroom HVAC dan Peralatan Penanganan Udara / EC Centrifugal Cleanroom Supply-Air Fan Unit
Cleanroom HVAC dan Peralatan Penanganan Udara

EC Centrifugal Cleanroom Supply-Air Fan Unit

An insulated inline fan package using a direct-drive backward-curved EC impeller to deliver stable cleanroom supply airflow against filters, coils and distribution pressure losses.
  • Backward-Curved EC Impeller
  • Stepless Airflow Adjustment
  • Insulated Low-Leakage Cabinet
  • Vibration-Isolated Fan Module
Permintaan untuk kutipan Browse Produk

Perkenalan produk

The EC centrifugal supply-air fan unit places a high-efficiency backward-curved impeller, electronically commutated motor, airflow sensing and flexible connections inside a rigid insulated cabinet. Direct drive removes belts and their wear particles, while variable speed allows the fan to compensate for filter loading or switch between occupied and setback airflow. Removable panels provide access to the wheel, motor electronics and isolation mounts from outside the air path.

Fitur utama:

The backward-curved impeller operates without a scroll housing and maintains stable efficiency across a broad cleanroom duty range.

Integrated EC speed control accepts analog or network commands without an external variable-frequency drive for smaller fan sizes.

Flexible inlet and discharge connections prevent casing vibration from transferring into rigid cleanroom ductwork.

An insulated double-skin cabinet reduces breakout noise and limits condensation on the casing during cold supply-air operation.

Kekhawatiran produk pelanggan

Cleanroom supply fans must overcome rising filter resistance while holding the scheduled airflow without adding unnecessary noise, vibration or maintenance debris.

Supply airflow falls as final filters accumulate dust, reducing room air changes and pressure.Closed-loop EC speed control increases fan output against the measured airflow or duct-pressure setpoint.
Belt dust and periodic tension adjustment are undesirable near a clean supply-air path.A direct-drive impeller eliminates belts, pulleys and routine belt alignment.
Fan vibration travels through the duct and becomes audible inside quiet cleanrooms.Spring or elastomer isolators and flexible connectors decouple the rotating assembly from the cabinet and duct.
A cramped plantroom prevents removal of the entire fan section for service.Large side panels expose the motor and wheel, while a slide-out fan base permits component replacement from one service side.

Aplikasi yang Tipis

Cleanroom AHU supply-fan replacement modulesFiltered make-up air booster systemsPharmaceutical production supply branchesLaboratory air-distribution pressure controlElectronics clean-bay ventilation

Parameter teknis

Typical construction ranges for an insulated EC centrifugal supply-air fan package are listed below.

Bahan intiAluminum or coated-steel backward-curved impeller in a mineral-wool-insulated galvanized steel cabinet
Ketebalan Panel (Panel Thickness)30-50 mm double-skin acoustic and thermal panel thickness
Efektif lebar800-2400 mm nominal fan-cabinet width
Panjang maksimumUp to 3500 mm for multi-fan or fan-plus-silencer assemblies
Baja menghadap ketebalan0.8-1.2 mm pre-painted outer skin and galvanized inner skin
Kepadatan inti (core density)40-80 kg/m³ typical mineral-wool cabinet insulation density
Konduktivitas Termal (Thermal Conductivity)Approximately 0.035-0.045 W/(m·K) for mineral-wool cabinet insulation
Permukaan selesaiWhite powder-coated frame with blue service doors and corrosion-resistant internal fan surfaces
Jenis BersamaBolted gasketed cabinet with flexible inlet and discharge connectors and vibration-isolated fan base
Customization (Kustomisasi)Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Single fan or parallel fan-array configurationConstant-airflow or constant-static-pressure controllerAcoustic attenuator and perforated inner linerGalvanized coated-aluminum or stainless air-path construction

Planning a EC Centrifugal Cleanroom Supply-Air Fan Unit specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami
Email Kami WhatsApp WhatsApp WhatsApp WhatsApp WeChat adalah

Beranda

Produk

Berita

Tentang Kami

Hubungi Kami