EC centrifugal cleanroom supply-air fan unit with insulated blue access doors

Bilik Bersih HVAC dan Peralatan Pengendalian Udara

Unit Kipas Udara Bekalan Bilik Bersih Centrifugal EC

An insulated inline fan package using a direct-drive backward-curved EC impeller to deliver stable cleanroom supply airflow against filters, coils and distribution pressure losses.

Backward-Curved EC Impeller
Stepless Airflow Adjustment
Insulated Low-Leakage Cabinet
Vibration-Isolated Fan Module

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The EC centrifugal supply-air fan unit places a high-efficiency backward-curved impeller, electronically commutated motor, airflow sensing and flexible connections inside a rigid insulated cabinet. Direct drive removes belts and their wear particles, while variable speed allows the fan to compensate for filter loading or switch between occupied and setback airflow. Removable panels provide access to the wheel, motor electronics and isolation mounts from outside the air path.

Ciri-ciri Utama

The backward-curved impeller operates without a scroll housing and maintains stable efficiency across a broad cleanroom duty range.

Integrated EC speed control accepts analog or network commands without an external variable-frequency drive for smaller fan sizes.

Flexible inlet and discharge connections prevent casing vibration from transferring into rigid cleanroom ductwork.

An insulated double-skin cabinet reduces breakout noise and limits condensation on the casing during cold supply-air operation.

Kebimbangan Produk Pelanggan

Cleanroom supply fans must overcome rising filter resistance while holding the scheduled airflow without adding unnecessary noise, vibration or maintenance debris.

Supply airflow falls as final filters accumulate dust, reducing room air changes and pressure.Closed-loop EC speed control increases fan output against the measured airflow or duct-pressure setpoint.

Belt dust and periodic tension adjustment are undesirable near a clean supply-air path.A direct-drive impeller eliminates belts, pulleys and routine belt alignment.

Fan vibration travels through the duct and becomes audible inside quiet cleanrooms.Spring or elastomer isolators and flexible connectors decouple the rotating assembly from the cabinet and duct.

A cramped plantroom prevents removal of the entire fan section for service.Large side panels expose the motor and wheel, while a slide-out fan base permits component replacement from one service side.

Permohonan yang biasa

Cleanroom AHU supply-fan replacement modulesFiltered make-up air booster systemsPharmaceutical production supply branchesLaboratory air-distribution pressure controlElectronics clean-bay ventilation

Parameter teknikal

Typical construction ranges for an insulated EC centrifugal supply-air fan package are listed below.

Bahan Teras	Aluminum or coated-steel backward-curved impeller in a mineral-wool-insulated galvanized steel cabinet
Ketebalan Panel	30-50 mm double-skin acoustic and thermal panel thickness
Lebar berkesan	800-2400 mm nominal fan-cabinet width
Panjang maksimum	Up to 3500 mm for multi-fan or fan-plus-silencer assemblies
Keluli Menghadapi Ketebalan	0.8-1.2 mm pre-painted outer skin and galvanized inner skin
Ketumpatan teras	40-80 kg/m³ typical mineral-wool cabinet insulation density
Kekonduksian Terma	Approximately 0.035-0.045 W/(m·K) for mineral-wool cabinet insulation
Kemasan permukaan	White powder-coated frame with blue service doors and corrosion-resistant internal fan surfaces
Jenis Bersatu	Bolted gasketed cabinet with flexible inlet and discharge connectors and vibration-isolated fan base
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Single fan or parallel fan-array configurationConstant-airflow or constant-static-pressure controllerAcoustic attenuator and perforated inner linerGalvanized coated-aluminum or stainless air-path construction

Planning a EC Centrifugal Cleanroom Supply-Air Fan Unit specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami