Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Salle blanche HVAC et équipement de manutention de l'air
Unité de traitement de l'air de récupération de chaleur
A dual-air-stream unit that transfers useful heat between exhaust and outdoor air while keeping filtration and airflow control independently serviceable.
- Separated Supply and Exhaust
- Selectable Recovery Technology
- Bypass and Frost Control
- Reduced Outdoor-Air Load
Introduction de produit
The heat recovery air handling unit brings outdoor supply and building exhaust through a common insulated casing while maintaining defined separation between air streams. Counterflow plate exchangers offer no moving transfer surface, rotary wheels provide high sensible and latent recovery where appropriate, and run-around coils completely separate the ducts. Bypass dampers, frost control and independent fans keep airflow stable through changing outdoor conditions. The recovery method is chosen according to contamination-transfer tolerance, humidity objectives and physical duct arrangement.
Key Features
Independent supply and exhaust fans maintain balanced airflow through different filter-loading conditions.
Bypass and frost-control sequences protect the exchanger during extreme ambient operation.
Accessible recovery cassettes and drain sections simplify inspection and cleaning.
Préoccupations du client produit
Energy recovery is valuable only when cross-stream leakage, frost, condensate and fan balance are controlled for the actual exhaust source.
Exhaust contaminants can cross into the clean supply air through the wrong recovery device.A plate or run-around system is selected where physical stream separation is the priority.
Ice blocks the exchanger during cold outdoor operation.Temperature-based bypass, preheat or controlled defrost limits frost accumulation.
Unequal supply and exhaust pressure drives leakage across a rotary wheel.Fan control and purge-section arrangement establish the intended pressure relationship.
Condensate remains under a plate exchanger and reaches adjacent panels.A full-width sloped drain pan collects water from the complete recovery section.
Les applications typiques
Cleanroom ventilation systemsLaboratories with high exhaustHealthcare clean facilitiesPharmaceutical productionEnergy-conscious industrial ventilation
Paramètres techniques
Representative casing data for a dual-stream heat-recovery air handling unit are shown below.
| Matériaux de base | Closed-cell polyurethane or mineral-wool insulation in separated double-skin air paths |
|---|---|
| Panneau épaisseur | 50–60 mm insulated casing |
| Largeur effective | 1000–3200 mm nominal unit width |
| Longueur maximale | Up to 10000 mm including recovery, filter, coil and fan sections |
| Acier face épaisseur | 0.6–1.0 mm galvanized, coated or stainless sheet skins |
| Densité Core | 40–44 kg/m³ polyurethane or 86–100 kg/m³ mineral wool |
| Conductivité thermique | 0.022–0.040 W/(m·K) for the casing insulation |
| surface finie | Powder-coated exterior with cleanable galvanized or stainless inner lining |
| Type joint | Gasketed dual-stream casing with sealed recovery cassette and independent duct collars |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Counterflow plate heat exchangerRotary sensible or enthalpy wheelRun-around coil recovery loopBypass damper, preheat and frost-control package
Planning a Heat Recovery Air Handling Unit specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
