English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الغرف النظيفة المحددة للصناعة
طبية محكم الباب التلقائي
A single-leaf automatic sliding door that follows a down-and-in closing path to compress its perimeter seal around controlled hospital and cleanroom openings.
- Perimeter Compression Seal
- 60 mm Insulated Leaf
- Presence-Sensing Automation
- Flush Observation Glazing
مقدمة المنتج
The medical hermetic automatic door combines a rigid insulated leaf with a natural-anodized aluminum perimeter, a sealed overhead operator and a profiled frame. As the leaf reaches the closed position, the rail geometry guides it toward the frame and floor so the replaceable EPDM edge is compressed around the opening. Smooth HPL faces, a flush double-glazed observation window, a stainless pull handle and a compact presence sensor provide cleanable clinical surfaces together with controlled automatic access.
الخصائص الرئيسية
A 60 mm PIR-insulated leaf combines low mass with a rigid, flush surface suited to frequent automatic cycles.
The overhead presence sensor monitors the passage zone while the controller can reverse the moving leaf when an obstruction is detected.
Flush observation glazing and a removable sloped operator cover minimize projecting ledges on the exposed clinical side.
مخاوف المنتج للعملاء
A powered clinical doorway must limit leakage without introducing difficult-to-clean projections or compromising safe movement through a busy controlled opening.
A conventional parallel sliding leaf may leave continuous gaps at the jambs and floor when room pressure changes.The guided down-and-in closing movement compresses a replaceable EPDM seal around the frame and threshold.
Bulky surface hardware and recessed trim can create ledges that are awkward to wipe around.Flush HPL faces, flush glazing, rounded aluminum edges and a sloped operator cover reduce exposed dust-catching profiles.
An automatic door can begin closing while a trolley, bed or person still occupies the passage zone.A monitored presence sensor and obstruction-response control keep the opening supervised throughout the closing cycle.
Door leaves can become difficult to handle during a temporary loss of electrical power.The balanced sliding mechanism retains a manual release path, with battery-backed operation available when the access plan requires it.
تطبيقات نموذجية
Hospital operating rooms and sterile corridorsIsolation and protective-environment roomsPharmaceutical cleanroom access pointsLaboratory and diagnostic procedure suites
المعلمات الفنية
Typical configurable construction values for a single-leaf PIR-core medical hermetic automatic sliding door are listed below.
| المواد الأساسية | CFC-free rigid PIR insulation within an EN AW-6063 aluminum perimeter frame and smooth HPL facings |
|---|---|
| سمك اللوحة | 60 mm insulated door leaf |
| العرض الفعال | 1200-1800 mm clear opening |
| الحد الأقصى الطول | Up to 2100 mm standard clear opening height |
| الصلب يواجه سمك | 0.8-1.0 mm optional AISI 304 stainless steel facing |
| الكثافة الأساسية | 35-40 kg/m³ rigid PIR insulation |
| الموصلية الحرارية | 0.022-0.026 W/(m·K) for the rigid PIR core |
| إنهاء السطح | Smooth light gray-white HPL faces, satin natural-anodized aluminum profiles and flush double glazing |
| نوع المشترك | 45-degree down-and-in sliding rail with a replaceable continuous EPDM perimeter compression seal and bottom guide |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Automatic or manual single-leaf operating configurationsHPL, satin stainless steel or solid-mineral-surface leaf finishesAlternative flush observation-window dimensions and privacy glazingTouch-free activation, foot switch, interlock and standby-battery controls
Planning a Medical Hermetic Automatic Door specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
