English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ESD والمنتجات المضادة للساكنة
ESD الأسرة الإصبع
ESD Finger Cots are close-fitting static-control fingertip covers designed for tactile handling where full gloves are unnecessary.
- Covers working fingertips without restricting the whole hand.
- Powder-free material limits loose residue during handling.
- Rolled cuff supports quick, secure fitting.
مقدمة المنتج
Thin natural-rubber or nitrile film surrounds an individual finger and uses a rolled cuff to remain in place. A controlled conductive or dissipative compound reduces charge accumulation while the smooth, powder-free surface limits transfer to parts. Sizes can be selected for consistent fingertip fit.
الخصائص الرئيسية
Powder-free finish reduces particulate residue.
Rolled cuff improves retention and donning.
Smooth closed tip avoids seams at the contact area.
Compact format reduces hand coverage and heat buildup.
Multiple sizes support a close, wrinkle-controlled fit.
مخاوف المنتج للعملاء
Finger cots must provide clean tactile contact while fitting securely and maintaining suitable static-control behavior throughout the task.
Full gloves reduce comfort for short fingertip work.Individual cots cover only the fingers that touch the product.
Powder transfers to sensitive surfaces.Powder-free processing limits loose donning residue.
Loose material wrinkles around small parts.Multiple sizes enable close-fitting film around the fingertip.
The cover rolls off during manipulation.An elastic rolled cuff retains the cot near the finger base.
Ordinary rubber can accumulate charge.Static-control polymer formulation provides a dissipative handling surface.
تطبيقات نموذجية
Electronic component picking and placement.Optical and sensor assembly.Precision inspection and rework.Clean packaging of small parts.Laboratory sample handling.
المعلمات الفنية
The values below describe common disposable static-control finger cots; polymer, color, thickness and size can be matched to handling and cleanliness requirements.
| المواد الأساسية | Static-dissipative natural latex or nitrile elastomer |
|---|---|
| سمك اللوحة | 0.08–0.15 mm |
| العرض الفعال | 20–35 mm flat width by size |
| الحد الأقصى الطول | Up to 80 mm |
| الصلب يواجه سمك | 0.0 mm; no steel facing |
| الكثافة الأساسية | 920–1050 kg/m³ |
| الموصلية الحرارية | 0.13–0.20 W/(m·K) |
| إنهاء السطح | Smooth powder-free pale pink elastomer with rolled cuff |
| نوع المشترك | Seamless closed fingertip sleeve with rolled open cuff |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Natural latex or latex-free nitrile.Pink, black or natural color.Small through extra-large sizes.Smooth or textured fingertip finish.Powder-free clean-packed supply.Alternative dissipative resistance ranges.
Planning a ESD Finger Cots specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
