İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Test ve Validasyon Aletleri
Termal Anemometre
A precision hot-wire thermal anemometer for low air-velocity measurement, temperature indication and cleanroom airflow surveys at grilles, hoods and open work zones.
- Sensitive hot-wire measurement for low-speed cleanroom air.
- Slim telescopic probe with minimal flow disturbance.
- Averaging and logging for structured airflow traverses.
Ürün tanıtımı
This thermal anemometer uses a heated miniature sensor whose cooling response tracks local air velocity with high sensitivity at low speeds. A slim telescopic probe enters grilles, ducts and confined test locations with limited flow disturbance, while the handheld meter provides velocity, temperature, averaging and data-storage functions for systematic qualification work.
Ana Özellikler
Slim telescopic probe reaches ducts and overhead outlets with minimal flow obstruction.
Simultaneous velocity and air-temperature readings support ventilation diagnostics.
Timed and multi-point averaging stabilizes measurements in fluctuating air streams.
Selectable duct area enables calculated volumetric-flow results.
Stored readings can support traverse records and qualification documentation.
Müşteri Ürün Sorunları
Low-speed unidirectional airflow requires a sensitive sensor that can enter restricted test points without materially changing the velocity being measured.
Very low cleanroom air speeds can fall below the useful sensitivity of a compact vane.A heated miniature sensor responds to small changes in convective cooling for dependable low-velocity readings.
A bulky probe can disturb the flow inside a grille or narrow duct.The slender telescopic shaft and small sensor tip reduce blockage at the measurement point.
Local turbulence makes a single instantaneous value unrepresentative.Timed and multi-point averaging produces a more stable result across the prescribed traverse.
Long qualification surveys are vulnerable to transcription errors.Onboard storage keeps point readings and statistics available for later review and reporting.
Tipik uygulamalar
Cleanroom low-velocity airflow mappingLaminar-flow hood and workstation verificationSupply grille and diffuser traversesDuct velocity and volume-flow testingVentilation commissioning and troubleshooting
Teknik parametreler
Representative construction dimensions for a handheld hot-wire instrument are listed below; probe geometry, sensing range and environmental channels can be selected for the validation protocol.
| Temel malzemeler | Miniature heated-film sensor, stainless telescopic probe and impact-resistant polymer handheld housing |
|---|---|
| Panel kalınlığı | Typically 2.0-3.0 mm for the molded meter enclosure |
| Effective Width (Etkili Genişlik) | Approximately 7-12 mm across the protected probe tip |
| Maksimum uzunluk | Approximately 900-1100 mm with the telescopic probe fully extended |
| Çelik yüz yüze kalınlığı | Typically 0.3-0.8 mm for the stainless telescopic probe sections |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7800-8000 kg/m³ for stainless probe components |
| Termal İletkenlik | Approximately 14-17 W/(m·K) for stainless probe components |
| Yüzey bitirme | Dark graphite overmolded meter with satin stainless probe and black protective sensor tip |
| Ortak tip | Locking telescopic sections with keyed detachable probe connection and protected sensing window |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Straight or articulating telescopic probeVelocity and temperature probeHumidity-capable probe configurationProtective instrument caseData-download softwareTraceable calibration service
Planning a Thermal Anemometer specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
