İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kurulum Aksesuarları
Paslanmaz Çelik Self Tapping Screw
A corrosion-resistant hex washer-head self-drilling screw for fixing cleanroom sheet-metal skins, trims and light framing without a separate pilot operation.
- Self-Drilling Point
- A2 Stainless Steel
- Integral Washer Head
- Sheet-Metal Thread
Ürün tanıtımı
This stainless steel self-tapping screw combines a drill-point tip, coarse sheet-metal thread and hex washer head in one fastener. The cutting flutes form a pilot opening through compatible light-gauge steel, after which the thread draws the components together. The integral flange spreads seating pressure across trim or panel facing, while stainless construction supports clean, corrosion-resistant installation hardware.
Ana Özellikler
Coarse threads develop engagement in light-gauge framing and folded trim.
The hex washer head supports positive driver engagement and distributed seating pressure.
A2 stainless steel provides a clean bright finish and practical interior corrosion resistance.
Müşteri Ürün Sorunları
Thin cleanroom facings require a fastener that starts predictably, seats without excessive indentation and resists corrosion after installation.
Conventional points skate on smooth metal skins.The self-drilling flute establishes the hole before the thread engages.
Small heads concentrate load and distort trim.An integral washer flange spreads seating force over a wider area.
Over-driving strips light-gauge thread engagement.Matched screw length, drilling capacity and controlled driver torque preserve the formed thread.
Plated carbon-steel fasteners can stain in humid service.A2 or A4 stainless grade is selected for the exposure conditions.
Tipik uygulamalar
Cleanroom panel trim fixingLight-gauge frame assemblyCeiling grid accessoriesDoor and window perimeter trimsStainless sheet-metal attachments
Teknik parametreler
Typical construction ranges for a stainless hex washer-head self-drilling screw are listed below.
| Temel malzemeler | A2-304 stainless steel self-drilling fastener |
|---|---|
| Panel kalınlığı | 0.50-6.00 mm combined drilling and fastening thickness |
| Effective Width (Etkili Genişlik) | 4.20-6.30 mm nominal thread diameter |
| Maksimum uzunluk | Up to 150 mm overall screw length |
| Çelik yüz yüze kalınlığı | 0.40-1.20 mm typical cleanroom panel facing thickness |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7900-8000 kg/m³ for stainless steel |
| Termal İletkenlik | Approximately 14-17 W/(m·K) for austenitic stainless steel |
| Yüzey bitirme | Bright passivated stainless steel with plain hex washer head |
| Ortak tip | Self-drilled threaded lap or trim-to-frame mechanical fastening |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
A2-304 or A4-316 stainlessHex washer or low-profile headOptional bonded sealing washerMultiple diameters and drilling capacities
Planning a Stainless Steel Self-Tapping Screw specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
