İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Duvar ve Tavan Sistemleri
Paslanmaz Çelik Temiz Oda Duvar Liner Panel
A slim 10 mm aluminum-honeycomb liner faced with stainless steel, designed to upgrade existing walls, columns and bulkheads with a rigid, non-shedding surface and minimal loss of room space.
- Slim 10 mm Wall Overlay
- 304 or 316L Stainless Face
- Rigid Honeycomb Backing
- Sealed Butt-Joint Finish
Ürün tanıtımı
The Stainless Steel Cleanroom Wall Liner Panel turns an existing sound substrate into a cleanable controlled-environment surface without building a full-depth partition. A thin aluminum honeycomb core keeps the large stainless sheet flat and resists local impact better than an unsupported skin. Panels fix directly to walls, columns or bulkheads and meet at narrow butt joints that are sealed flush on site. The low build-up preserves usable floor area, while factory-cut edges and openings allow the liner to wrap architectural details neatly.
Ana Özellikler
Stainless steel provides a durable surface for frequent wiping and demanding hygiene routines.
Aluminum honeycomb backing controls sheet waviness across broad wall areas.
A non-fibrous core avoids exposed mineral strands when shaped around columns or bulkheads.
Narrow sealed butt joints create a restrained appearance without bulky connecting trims.
Müşteri Ürün Sorunları
Liner-panel users need to control room-space loss, sheet waviness, sealed retrofit joints and corrosion exposure from cleaning agents.
A new full-depth partition would reduce usable space in a small existing room.The 10 mm liner fixes over the sound wall substrate with minimal encroachment.
Large single stainless sheets can show ripples and dents after installation.Continuous honeycomb backing supports the metal face and spreads local contact pressure.
Uneven existing walls create visible steps at thin cladding joints.Leveling shims and accurately cut panels establish a common finished plane before sealing.
Aggressive cleaning media may discolor an unsuitable stainless grade or finish.304 or 316L facing and the appropriate 2B, BA or brushed surface can be selected for the exposure.
Tipik uygulamalar
Pharmaceutical wash and preparation roomsStainless wall overlays for hygienic food plantsStainless laboratory wall refurbishmentOperating-room column and bulkhead claddingClean manufacturing areas with frequent surface cleaning
Teknik parametreler
The values below describe a thin stainless-faced aluminum-honeycomb liner for direct wall cladding.
| Temel malzemeler | 9 mm 3003-series aluminum honeycomb |
|---|---|
| Panel kalınlığı | 10 mm |
| Effective Width (Etkili Genişlik) | 1200 mm |
| Maksimum uzunluk | 3000 mm |
| Çelik yüz yüze kalınlığı | 0.50–0.80 mm |
| Core Density (Çekirdek Yoğunluğu) | Approximately 27 kg/m³ |
| Termal İletkenlik | 0.11–0.15 W/(m·K) |
| Yüzey bitirme | 304 or 316L stainless steel in 2B, BA or brushed finish |
| Ortak tip | Narrow butt joint with flush cleanroom sealant |
| Customization (Özelleşme) | Stainless grade, finish, panel shape and cut-outs can be selected for the intended cleaning and exposure conditions |
Mevcut Seçenekler
304 or 316L stainless steel facing2B, BA or directional brushed finishAdhesive, magnetic or concealed mechanical fixingFactory-shaped column wraps and service cut-outs
Planning a Stainless Steel Cleanroom Wall Liner Panel specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
