İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda HVAC ve Hava İşleme Ekipmanları
Paketlenmiş elektrikli sıcak su kazanı
A floor-standing electric boiler package that heats closed-loop water for cleanroom AHU coils without combustion, flues or on-site fuel storage.
- Flue-Free Electric Heating
- Staged Immersion Elements
- Compact Stainless Vessel
- Integrated Hydronic Safeties
Ürün tanıtımı
The packaged boiler encloses a stainless pressure vessel, replaceable immersion elements, contactors or electronic power control, circulation connections and safety devices in one floor-standing cabinet. Electrical energy is transferred directly into the closed hydronic loop, avoiding combustion air and exhaust infrastructure. Multiple element stages follow heating demand, while a touchscreen displays water temperature, operating state and alarms.
Ana Özellikler
Multiple element stages provide smaller output increments and distribute electrical loading.
A stainless vessel, relief valve, low-water protection and temperature limits form an integrated hydronic package.
Front and rear access panels expose the heater flange, terminals and water connections for service.
Müşteri Ürün Sorunları
Electric hydronic heating must fit available power, protect the vessel and respond smoothly to a variable coil load.
A facility cannot install gas piping, combustion air or a flue.Immersion heating produces hot water inside a sealed cabinet using only electrical and hydronic connections.
One large contactor stage causes temperature overshoot.Several element stages or proportional power control match output to the changing loop demand.
Low water level exposes heater elements to damaging temperature.Flow and low-water protection disable power before elements can operate dry.
Scale on the element sheath reduces transfer and service life.A removable heater flange exposes the complete bundle for inspection and cleaning.
Tipik uygulamalar
Cleanroom AHU heating waterLaboratory reheat systemsHospital ventilation heatingPharmaceutical utility loopsBackup heat for heat-pump plants
Teknik parametreler
Representative construction ranges for a commercial packaged electric hot-water boiler are listed below.
| Temel malzemeler | AISI 304 stainless steel pressure vessel with Incoloy-sheathed electric immersion elements |
|---|---|
| Panel kalınlığı | 1.2-2.0 mm powder-coated steel cabinet panels |
| Effective Width (Etkili Genişlik) | 500-1400 mm nominal boiler cabinet width |
| Maksimum uzunluk | Up to 2085 mm overall cabinet depth across packaged boiler capacities |
| Çelik yüz yüze kalınlığı | 1.2-2.0 mm exterior steel sheet |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7900 kg/m³ for the AISI 304 stainless steel pressure vessel |
| Termal İletkenlik | Approximately 15 W/(m·K) for the AISI 304 stainless steel pressure-vessel material |
| Yüzey bitirme | Dark-blue polyester powder-coated cabinet with brushed stainless vessel |
| Ortak tip | Bolted cabinet, flanged immersion-heater bundle and threaded or flanged hydronic ports |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Staged contactor or proportional SCR controlDifferent vessel volumes and heating capacitiesIntegrated circulation pump and expansion vesselRemote enable, alarm contacts and communications gateway
Planning a Packaged Electric Hot-Water Boiler specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
