Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de HVAC y manejo de aire para salas limpias
Calderas eléctricas de agua caliente empaquetadas
A floor-standing electric boiler package that heats closed-loop water for cleanroom AHU coils without combustion, flues or on-site fuel storage.
- Flue-Free Electric Heating
- Staged Immersion Elements
- Compact Stainless Vessel
- Integrated Hydronic Safeties
Introducción del producto
The packaged boiler encloses a stainless pressure vessel, replaceable immersion elements, contactors or electronic power control, circulation connections and safety devices in one floor-standing cabinet. Electrical energy is transferred directly into the closed hydronic loop, avoiding combustion air and exhaust infrastructure. Multiple element stages follow heating demand, while a touchscreen displays water temperature, operating state and alarms.
Características clave
Multiple element stages provide smaller output increments and distribute electrical loading.
A stainless vessel, relief valve, low-water protection and temperature limits form an integrated hydronic package.
Front and rear access panels expose the heater flange, terminals and water connections for service.
Preocupaciones del producto del cliente
Electric hydronic heating must fit available power, protect the vessel and respond smoothly to a variable coil load.
A facility cannot install gas piping, combustion air or a flue.Immersion heating produces hot water inside a sealed cabinet using only electrical and hydronic connections.
One large contactor stage causes temperature overshoot.Several element stages or proportional power control match output to the changing loop demand.
Low water level exposes heater elements to damaging temperature.Flow and low-water protection disable power before elements can operate dry.
Scale on the element sheath reduces transfer and service life.A removable heater flange exposes the complete bundle for inspection and cleaning.
Aplicaciones típicas
Cleanroom AHU heating waterLaboratory reheat systemsHospital ventilation heatingPharmaceutical utility loopsBackup heat for heat-pump plants
Parámetros técnicos
Representative construction ranges for a commercial packaged electric hot-water boiler are listed below.
| Materiales Core | AISI 304 stainless steel pressure vessel with Incoloy-sheathed electric immersion elements |
|---|---|
| Panel de espesor | 1.2-2.0 mm powder-coated steel cabinet panels |
| Ancho efectivo | 500-1400 mm nominal boiler cabinet width |
| Longitud máxima | Up to 2085 mm overall cabinet depth across packaged boiler capacities |
| Acero frente a espesor | 1.2-2.0 mm exterior steel sheet |
| Densidad Core | Approximately 7900 kg/m³ for the AISI 304 stainless steel pressure vessel |
| Conductividad térmica | Approximately 15 W/(m·K) for the AISI 304 stainless steel pressure-vessel material |
| Superficie acabada | Dark-blue polyester powder-coated cabinet with brushed stainless vessel |
| Tipo conjunto | Bolted cabinet, flanged immersion-heater bundle and threaded or flanged hydronic ports |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Staged contactor or proportional SCR controlDifferent vessel volumes and heating capacitiesIntegrated circulation pump and expansion vesselRemote enable, alarm contacts and communications gateway
Planning a Packaged Electric Hot-Water Boiler specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
