İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Ekipmanları Yedek Parçaları
FFU motorları
A compact replacement drive motor for restoring controlled airflow in cleanroom fan filter units without replacing the complete housing and filter assembly.
- Compact FFU Drive
- Speed-Control Compatible
- Low-Vibration Construction
- Matched Mounting Options
Ürün tanıtımı
The FFU motor is the direct-drive power component fitted between the fan impeller and the electrical control system of a fan filter unit. Typical replacements use a compact external-rotor or electronically commutated construction to fit the shallow FFU plenum while supporting variable-speed airflow control. The shaft, flange, electrical connector and control input must be selected to match the original fan assembly. Balanced rotating parts and secure bearing support help limit vibration transmitted to the ceiling grid and final filter.
Ana Özellikler
Variable-speed versions accept a matched analog, PWM or digital control interface.
Sealed bearings and a rigid mounting flange support stable direct-drive operation.
Multiple shaft, connector and flange arrangements simplify replacement in established FFU designs.
Müşteri Ürün Sorunları
A replacement motor must restore airflow while remaining mechanically and electrically compatible with the existing FFU.
The replacement shaft or flange does not align with the existing impeller and mounting plate.Motor selection is matched to the original shaft diameter, projection, flange pattern and installation depth.
An incompatible speed signal prevents the FFU controller from regulating airflow.Available control interfaces are selected to suit the existing analog, PWM or communication controller.
Motor vibration is transferred into the ceiling grid and filter housing.Rigid bearing support and balanced direct-drive components reduce mechanical runout at the mounting interface.
Cable and connector differences delay field replacement.Connector pinout, cable length and lead termination can be configured for the target FFU assembly.
Tipik uygulamalar
Cleanroom fan filter unitsLaminar-flow ceiling modulesMini-environment air-supply modulesFFU retrofit and maintenance programs
Teknik parametreler
Typical construction ranges for compact FFU replacement motors are shown below.
| Temel malzemeler | Laminated electrical-steel stator with copper windings and permanent-magnet rotor |
|---|---|
| Panel kalınlığı | 70-140 mm nominal motor body depth |
| Effective Width (Etkili Genişlik) | 120-250 mm nominal flange or housing width |
| Maksimum uzunluk | Up to 300 mm overall motor and shaft length |
| Çelik yüz yüze kalınlığı | 1.0-3.0 mm steel or aluminum end-cover wall thickness |
| Core Density (Çekirdek Yoğunluğu) | 7600-7850 kg/m³ for laminated electrical-steel components |
| Termal İletkenlik | 45-55 W/(m·K) for electrical-steel motor laminations |
| Yüzey bitirme | Black protective motor shell with natural silver machined or cast-metal mounting parts |
| Ortak tip | Direct-drive shaft with bolted flange mounting and plug-in electrical lead |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
AC or EC motor configurationMatched shaft and flange geometryAnalog or PWM speed controlCustom cable and connector termination
Planning a FFU Motor specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
