İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
FFU ve Terminal Hava Arıtma Ekipmanı
Fan Powered HEPA Modülü
A compact ceiling module integrating an EC fan, sealed HEPA panel and room-side diffuser to add independent filtered supply at a selected cleanroom location.
- Integrated HEPA and EC Fan
- Room-Side Replaceable Filter
- Ducted or Open Inlet
- Low-Profile Ceiling Fit
Ürün tanıtımı
The fan-powered HEPA module packages a backward-curved EC fan above a rigid H13 or H14 filter in a slim ceiling enclosure. It can draw air directly from the ceiling plenum or connect to a small duct collar for conditioned make-up air. The fan overcomes the terminal filter resistance locally, and a perforated room-side face spreads the discharge across the occupied zone. A removable diffuser exposes filter retaining clamps and service ports without disturbing the ceiling housing, making the module practical for laboratories, compounding suites and retrofit clean areas that need one additional filtered supply point.
Ana Özellikler
A room-side removable filter can be lowered through the diffuser opening while the ceiling casing remains installed.
Open-plenum and round-duct inlet arrangements support both recirculated and conditioned air layouts.
Differential-pressure and aerosol ports can be positioned behind the removable front plate for accessible testing.
Müşteri Ürün Sorunları
A terminal HEPA housing cannot deliver design airflow when the available duct pressure is low or when a retrofit location lacks a dedicated supply branch.
The central duct system has insufficient spare pressure for another terminal HEPA outlet.The integrated EC fan supplies the pressure required across the local final filter.
Opening the ceiling void for filter replacement disrupts a controlled room and exposes hidden surfaces.Room-side clamps allow the filter to be removed downward through the diffuser opening.
A new duct branch is impractical above an occupied cleanroom retrofit area.An open-plenum intake enables local recirculation where conditioned supply is not required.
Test connections above the ceiling are difficult to reach during routine filter checks.Room-side pressure and aerosol ports remain accessible behind the removable face plate.
Tipik uygulamalar
Hospital pharmacy cleanroomsLaboratory clean suitesAseptic compounding roomsMedical-device assemblyCleanroom retrofit supply points
Teknik parametreler
Representative construction ranges for a compact fan-powered HEPA ceiling module are shown below.
| Temel malzemeler | Backward-curved EC fan with micro-glass H13 or H14 mini-pleat filter and aluminium frame |
|---|---|
| Panel kalınlığı | 280-420 mm overall module depth |
| Effective Width (Etkili Genişlik) | 575-1170 mm nominal ceiling-grid width |
| Maksimum uzunluk | Up to 1170 mm standard module length |
| Çelik yüz yüze kalınlığı | 0.8-1.2 mm powder-coated steel or 304 stainless-steel housing |
| Core Density (Çekirdek Yoğunluğu) | Approximately 90-120 kg/m³ compacted density of the HEPA pack fitted to the fan-powered ceiling module |
| Termal İletkenlik | Approximately 0.035-0.043 W/(m·K) for the HEPA pack fitted to the fan-powered ceiling module |
| Yüzey bitirme | White epoxy-polyester powder coat with white perforated steel diffuser |
| Ortak tip | Room-side compression or gel-seal filter interface with gasketed T-grid perimeter |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Open-plenum or round duct inletH13 or H14 filterRoom-side replaceable gel-seal configuration0-10 V, BACnet or standalone speed control
Planning a Fan-Powered HEPA Module specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
