Airflow visualization fogger in three-quarter handheld instrument view

Temiz Oda Test ve Validasyon Aletleri

Hava akışı görselleştirme Fogger

A compact handheld fog applicator delivering a controlled visible tracer for localized cleanroom airflow visualization and documented smoke studies.

Precise handheld tracer placement.
Gentle trigger-controlled fog pulses.
Compact wipe-clean study instrument.

Alıntı isteği Browse ürünleri

Ürün tanıtımı

This portable fogger places a fine, visible aerosol precisely at filter faces, transfer openings and equipment boundaries where a larger generator is cumbersome. Its pistol-style body integrates a small fluid cartridge, low-momentum delivery path and simple trigger control. The operator can introduce short fog pulses while keeping hands and the supply assembly clear of the observed airflow pattern.

Ana Özellikler

Handheld format reaches confined process and barrier-system locations.

Low-momentum output helps the tracer follow the local airflow rather than drive it.

Trigger control supports short, repeatable visualization pulses.

Replaceable fluid cartridge simplifies preparation between study points.

Smooth exterior surfaces allow routine wipe-down before controlled-area use.

Compact case format supports transport with study accessories.

Müşteri Ürün Sorunları

Localized smoke studies need a visible tracer close to the point of interest without a bulky supply unit or excessive outlet momentum altering the observed air path.

A floor-standing fog generator is awkward at small test locations.The balanced handheld body positions the outlet directly beside localized airflow boundaries.

A strong tracer jet can disturb the pattern under evaluation.The short delivery path is designed for a gentle visible discharge controlled by the trigger.

Long continuous fog output can obscure the observation area.Momentary operation allows the technician to introduce brief pulses as each camera view is recorded.

Study equipment must be prepared efficiently between controlled-area visits.A removable cartridge and smooth exterior simplify fluid handling and routine wipe-down.

Tipik uygulamalar

Localized cleanroom airflow visualizationHEPA filter coverage demonstrationsIsolator and RABS smoke studiesPass-through and doorway flow observationEquipment wake and turbulence investigation

Teknik parametreler

Representative handheld fogger construction is summarized below; nozzle geometry, cartridge capacity and control accessories can be selected for the intended study method.

Temel malzemeler	Engineering-polymer handpiece, stainless fluid path, replaceable fog-fluid cartridge and electronic atomizer
Panel kalınlığı	Typically 2-3 mm for molded handpiece shell sections
Effective Width (Etkili Genişlik)	Approximately 45-75 mm across the handheld body
Maksimum uzunluk	Approximately 220-350 mm including outlet nozzle
Çelik yüz yüze kalınlığı	Typically 0.5-1.0 mm for stainless internal fluid-path components
Core Density (Çekirdek Yoğunluğu)	Approximately 1040-1200 kg/m³ for the engineering-polymer housing
Termal İletkenlik	Approximately 0.18-0.30 W/(m·K) for the polymer housing
Yüzey bitirme	Smooth white and blue wipe-clean housing with satin stainless nozzle and clear fluid cartridge
Ortak tip	Sealed cartridge coupling with removable directional outlet nozzle
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Straight or angled outlet nozzleAlternative cartridge capacitiesRechargeable battery packRemote trigger leadLED fog illuminationProtective transport case

Planning a Airflow Visualization Fogger specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun