Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Instrumentación de prueba y validación de sala limpia
Visualización de flujo de aire Fogger
A compact handheld fog applicator delivering a controlled visible tracer for localized cleanroom airflow visualization and documented smoke studies.
- Precise handheld tracer placement.
- Gentle trigger-controlled fog pulses.
- Compact wipe-clean study instrument.
Introducción del producto
This portable fogger places a fine, visible aerosol precisely at filter faces, transfer openings and equipment boundaries where a larger generator is cumbersome. Its pistol-style body integrates a small fluid cartridge, low-momentum delivery path and simple trigger control. The operator can introduce short fog pulses while keeping hands and the supply assembly clear of the observed airflow pattern.
Características clave
Low-momentum output helps the tracer follow the local airflow rather than drive it.
Trigger control supports short, repeatable visualization pulses.
Replaceable fluid cartridge simplifies preparation between study points.
Smooth exterior surfaces allow routine wipe-down before controlled-area use.
Compact case format supports transport with study accessories.
Preocupaciones del producto del cliente
Localized smoke studies need a visible tracer close to the point of interest without a bulky supply unit or excessive outlet momentum altering the observed air path.
A floor-standing fog generator is awkward at small test locations.The balanced handheld body positions the outlet directly beside localized airflow boundaries.
A strong tracer jet can disturb the pattern under evaluation.The short delivery path is designed for a gentle visible discharge controlled by the trigger.
Long continuous fog output can obscure the observation area.Momentary operation allows the technician to introduce brief pulses as each camera view is recorded.
Study equipment must be prepared efficiently between controlled-area visits.A removable cartridge and smooth exterior simplify fluid handling and routine wipe-down.
Aplicaciones típicas
Localized cleanroom airflow visualizationHEPA filter coverage demonstrationsIsolator and RABS smoke studiesPass-through and doorway flow observationEquipment wake and turbulence investigation
Parámetros técnicos
Representative handheld fogger construction is summarized below; nozzle geometry, cartridge capacity and control accessories can be selected for the intended study method.
| Materiales Core | Engineering-polymer handpiece, stainless fluid path, replaceable fog-fluid cartridge and electronic atomizer |
|---|---|
| Panel de espesor | Typically 2-3 mm for molded handpiece shell sections |
| Ancho efectivo | Approximately 45-75 mm across the handheld body |
| Longitud máxima | Approximately 220-350 mm including outlet nozzle |
| Acero frente a espesor | Typically 0.5-1.0 mm for stainless internal fluid-path components |
| Densidad Core | Approximately 1040-1200 kg/m³ for the engineering-polymer housing |
| Conductividad térmica | Approximately 0.18-0.30 W/(m·K) for the polymer housing |
| Superficie acabada | Smooth white and blue wipe-clean housing with satin stainless nozzle and clear fluid cartridge |
| Tipo conjunto | Sealed cartridge coupling with removable directional outlet nozzle |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Straight or angled outlet nozzleAlternative cartridge capacitiesRechargeable battery packRemote trigger leadLED fog illuminationProtective transport case
Planning a Airflow Visualization Fogger specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
