Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Filtro de aire y filtración química
Terminal de filtro HEPA
A low-profile final filter engineered for direct installation in cleanroom ceiling terminals, diffuser housings and laminar-flow supply modules.
- Ceiling-Terminal Format
- Uniform Downward Airflow
- Room-Side Service Option
- Protected Mini-Pleat Pack
Introducción del producto
The terminal HEPA filter packages a shallow mini-pleat media pack in a cleanroom-compatible anodized-aluminum frame sized for ceiling modules, fan filter units and laminar-flow diffusers. The downstream face is kept flat and protected so air can enter the occupied clean zone uniformly after the terminal screen or diffuser. A full perimeter seal interfaces with the terminal housing, and the low profile preserves plenum height above the ceiling grid. Optional scan-test and pressure-drop arrangements support routine in-place assessment without disturbing the upstream ductwork.
Características clave
Uniform mini-pleat spacing supports even discharge across a perforated face or diffuser screen.
Anodized-aluminum perimeter framing withstands repeated room-side cleaning and filter replacement.
Selectable sealing edges match common room-side replaceable and top-loading terminal housings.
Preocupaciones del producto del cliente
Terminal filtration must provide a final leak-resistant barrier without creating uneven supply patterns or consuming excessive ceiling plenum space.
A full-depth HEPA cell conflicts with ducts and utilities above a low ceiling.The shallow mini-pleat panel preserves clearance within crowded service plenums.
Nonuniform filter resistance creates visible high-velocity spots at the diffuser face.Consistent pleat spacing and full perimeter potting distribute flow across the complete terminal area.
Filter replacement from above interrupts utilities and exposes the plenum.A compatible room-side retaining arrangement allows the panel to be removed from the clean space.
Ceiling-grid movement compromises the seal around the final filter.A rigid aluminum frame and purpose-selected gasket, gel channel or knife edge maintain a defined sealing interface.
Aplicaciones típicas
Pharmaceutical cleanroom supply ceilingsHospital operating-room terminalsElectronics and semiconductor cleanroomsLaminar-flow canopiesRoom-side replaceable HEPA modules
Parámetros técnicos
Typical construction ranges for a cleanroom ceiling terminal HEPA filter are listed below.
| Materiales Core | Low-resistance microglass mini-pleat HEPA media with continuous glass-filament or thermoplastic separators |
|---|---|
| Panel de espesor | 70, 90 or 100 mm terminal-filter depth |
| Ancho efectivo | 305-610 mm ceiling-module width |
| Longitud máxima | Up to 1220 mm terminal panel length |
| Acero frente a espesor | 0.40-0.60 mm powder-coated steel or stainless-steel downstream faceguard |
| Densidad Core | Approximately 80-145 kg/m³ nominal mini-pleat pack density |
| Conductividad térmica | Approximately 0.033-0.039 W/(m·K) for dry low-resistance terminal-filter media |
| Superficie acabada | Clear anodized or white powder-coated aluminum frame with clean white media |
| Tipo conjunto | Potted mini-pleat panel with gasket, gel channel or knife-edge perimeter matched to the terminal housing |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
H13, H14 or ULPA efficiencyRoom-side replaceable or top-loading frameGel seal, gasket seal or integral knife edgePressure-drop port and scan-test access compatibility
Planning a Terminal HEPA Filter specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
