Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Filtres à air et filtration chimique
Filtre HEPA Terminal Filtre HEPA
A low-profile final filter engineered for direct installation in cleanroom ceiling terminals, diffuser housings and laminar-flow supply modules.
- Ceiling-Terminal Format
- Uniform Downward Airflow
- Room-Side Service Option
- Protected Mini-Pleat Pack
Introduction de produit
The terminal HEPA filter packages a shallow mini-pleat media pack in a cleanroom-compatible anodized-aluminum frame sized for ceiling modules, fan filter units and laminar-flow diffusers. The downstream face is kept flat and protected so air can enter the occupied clean zone uniformly after the terminal screen or diffuser. A full perimeter seal interfaces with the terminal housing, and the low profile preserves plenum height above the ceiling grid. Optional scan-test and pressure-drop arrangements support routine in-place assessment without disturbing the upstream ductwork.
Key Features
Uniform mini-pleat spacing supports even discharge across a perforated face or diffuser screen.
Anodized-aluminum perimeter framing withstands repeated room-side cleaning and filter replacement.
Selectable sealing edges match common room-side replaceable and top-loading terminal housings.
Préoccupations du client produit
Terminal filtration must provide a final leak-resistant barrier without creating uneven supply patterns or consuming excessive ceiling plenum space.
A full-depth HEPA cell conflicts with ducts and utilities above a low ceiling.The shallow mini-pleat panel preserves clearance within crowded service plenums.
Nonuniform filter resistance creates visible high-velocity spots at the diffuser face.Consistent pleat spacing and full perimeter potting distribute flow across the complete terminal area.
Filter replacement from above interrupts utilities and exposes the plenum.A compatible room-side retaining arrangement allows the panel to be removed from the clean space.
Ceiling-grid movement compromises the seal around the final filter.A rigid aluminum frame and purpose-selected gasket, gel channel or knife edge maintain a defined sealing interface.
Les applications typiques
Pharmaceutical cleanroom supply ceilingsHospital operating-room terminalsElectronics and semiconductor cleanroomsLaminar-flow canopiesRoom-side replaceable HEPA modules
Paramètres techniques
Typical construction ranges for a cleanroom ceiling terminal HEPA filter are listed below.
| Matériaux de base | Low-resistance microglass mini-pleat HEPA media with continuous glass-filament or thermoplastic separators |
|---|---|
| Panneau épaisseur | 70, 90 or 100 mm terminal-filter depth |
| Largeur effective | 305-610 mm ceiling-module width |
| Longueur maximale | Up to 1220 mm terminal panel length |
| Acier face épaisseur | 0.40-0.60 mm powder-coated steel or stainless-steel downstream faceguard |
| Densité Core | Approximately 80-145 kg/m³ nominal mini-pleat pack density |
| Conductivité thermique | Approximately 0.033-0.039 W/(m·K) for dry low-resistance terminal-filter media |
| surface finie | Clear anodized or white powder-coated aluminum frame with clean white media |
| Type joint | Potted mini-pleat panel with gasket, gel channel or knife-edge perimeter matched to the terminal housing |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
H13, H14 or ULPA efficiencyRoom-side replaceable or top-loading frameGel seal, gasket seal or integral knife edgePressure-drop port and scan-test access compatibility
Planning a Terminal HEPA Filter specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
