Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Prendas de sala limpia, EPP y consumibles
Z Toallitas de limpieza estériles
Sterile low-lint cleanroom wipes supplied in sealed transfer-ready packaging for controlled surface cleaning in aseptic processing areas.
- Sterile supply supports wiping procedures in higher-control aseptic areas
- Low-lint synthetic substrate provides clean wet strength
- Double-barrier peel packaging simplifies controlled transfer between zones
Introducción del producto
Sterile Cleanroom Wipes combine a low-lint polyester or polyester-blend substrate with a package configuration designed for transfer into controlled areas. The wipes may be supplied dry or pre-saturated, with small pack quantities reducing unnecessary exposure after opening. Clear double-barrier packaging and peelable seals support staged disinfection and entry while preserving the wipe stack until point of use.
Características clave
Synthetic low-lint fabric remains intact during wet wiping
Double-bag construction supports transfer through material airlocks
Peelable chevron end can be opened while wearing cleanroom gloves
Dry and pre-saturated chemistries can be matched to the cleaning procedure
Preocupaciones del producto del cliente
Aseptic-area wipes must arrive in a protected package, remain easy to transfer and provide enough wet strength for the intended cleaning motion. Large open packs can also increase exposure and unused-product waste.
Packaging surfaces may carry contamination between classified zones.Use nested cleanroom-compatible bags with clear staged-transfer procedures.
Opened bulk packs can expose unused wipes before they are needed.Select a pack count aligned with one room, shift or cleaning task.
Weak substrates may tear during disinfectant application.Specify a synthetic wipe with dependable wet strength and low fiber release.
An unsuitable solution load can leave surfaces too wet or dry too quickly.Choose dry wipes or a validated pre-saturated configuration for the site's contact-time requirements.
Aplicaciones típicas
Used for disinfectant application, residue removal, wiping-to-dry and critical-site cleaning in pharmaceutical aseptic suites, compounding areas, biotechnology production, medical-device assembly and controlled laboratories.
Parámetros técnicos
The ranges below cover common sterile square wipe configurations. Substrate, pack count, sterilization method and pre-saturation chemistry are selected for the approved facility cleaning program.
| Materiales Core | Low-lint knitted or nonwoven polyester wipe substrate |
|---|---|
| Panel de espesor | 0.30–0.65 mm |
| Ancho efectivo | 100–310 mm |
| Longitud máxima | 310 mm |
| Acero frente a espesor | 0 mm; no steel facing used |
| Densidad Core | 70–160 kg/m³ apparent fabric density |
| Conductividad térmica | 0.04–0.07 W/(m·K), substrate dependent |
| Superficie acabada | White low-lint wipe in clear double-barrier peel packaging |
| Tipo conjunto | Sealed cut-edge or sealed-edge wipe with heat-sealed package perimeter |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Dry or pre-saturated formatKnitted polyester or hydroentangled nonwoven substrateSmall task packs or standard stack packsDouble- or triple-bag transfer packagingGamma-irradiated sterile configurationMultiple wipe sizes and edge finishes
Planning a Sterile Cleanroom Wipes specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
