Three-quarter view of sterile cleanroom wipes in a clear blue-sealed pouch

クリーンルーム衣料品、 PPE 、消耗品

滅菌クリーンルームワイプ

Sterile low-lint cleanroom wipes supplied in sealed transfer-ready packaging for controlled surface cleaning in aseptic processing areas.

Sterile supply supports wiping procedures in higher-control aseptic areas
Low-lint synthetic substrate provides clean wet strength
Double-barrier peel packaging simplifies controlled transfer between zones

見積もりリクエスト製品案内

商品紹介

Sterile Cleanroom Wipes combine a low-lint polyester or polyester-blend substrate with a package configuration designed for transfer into controlled areas. The wipes may be supplied dry or pre-saturated, with small pack quantities reducing unnecessary exposure after opening. Clear double-barrier packaging and peelable seals support staged disinfection and entry while preserving the wipe stack until point of use.

主要な特徴

Sterile product configuration is available for aseptic cleaning programs

Synthetic low-lint fabric remains intact during wet wiping

Double-bag construction supports transfer through material airlocks

Peelable chevron end can be opened while wearing cleanroom gloves

Dry and pre-saturated chemistries can be matched to the cleaning procedure

お客様の製品に関する懸念事項

Aseptic-area wipes must arrive in a protected package, remain easy to transfer and provide enough wet strength for the intended cleaning motion. Large open packs can also increase exposure and unused-product waste.

Packaging surfaces may carry contamination between classified zones.Use nested cleanroom-compatible bags with clear staged-transfer procedures.

Opened bulk packs can expose unused wipes before they are needed.Select a pack count aligned with one room, shift or cleaning task.

Weak substrates may tear during disinfectant application.Specify a synthetic wipe with dependable wet strength and low fiber release.

An unsuitable solution load can leave surfaces too wet or dry too quickly.Choose dry wipes or a validated pre-saturated configuration for the site's contact-time requirements.

典型的な用途

Used for disinfectant application, residue removal, wiping-to-dry and critical-site cleaning in pharmaceutical aseptic suites, compounding areas, biotechnology production, medical-device assembly and controlled laboratories.

技術的なパラメータ

The ranges below cover common sterile square wipe configurations. Substrate, pack count, sterilization method and pre-saturation chemistry are selected for the approved facility cleaning program.

コア材料	Low-lint knitted or nonwoven polyester wipe substrate
パネルの厚さ	0.30–0.65 mm
有効幅	100–310 mm
最大長さ	310 mm
鋼鉄の厚さを直面する	0 mm; no steel facing used
コア密度	70–160 kg/m³ apparent fabric density
熱伝導率	0.04–0.07 W/(m·K), substrate dependent
表面仕上げ	White low-lint wipe in clear double-barrier peel packaging
ジョイントタイプ	Sealed cut-edge or sealed-edge wipe with heat-sealed package perimeter
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Dry or pre-saturated formatKnitted polyester or hydroentangled nonwoven substrateSmall task packs or standard stack packsDouble- or triple-bag transfer packagingGamma-irradiated sterile configurationMultiple wipe sizes and edge finishes

Planning a Sterile Cleanroom Wipes specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する