Three-quarter view of sterile cleanroom wipes in a clear blue-sealed pouch

Pakaian Bilik Bersih, PPE dan Barangan boleh guna

Wipes Bilik Bersih Steril

Sterile low-lint cleanroom wipes supplied in sealed transfer-ready packaging for controlled surface cleaning in aseptic processing areas.

Sterile supply supports wiping procedures in higher-control aseptic areas
Low-lint synthetic substrate provides clean wet strength
Double-barrier peel packaging simplifies controlled transfer between zones

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Sterile Cleanroom Wipes combine a low-lint polyester or polyester-blend substrate with a package configuration designed for transfer into controlled areas. The wipes may be supplied dry or pre-saturated, with small pack quantities reducing unnecessary exposure after opening. Clear double-barrier packaging and peelable seals support staged disinfection and entry while preserving the wipe stack until point of use.

Ciri-ciri Utama

Sterile product configuration is available for aseptic cleaning programs

Synthetic low-lint fabric remains intact during wet wiping

Double-bag construction supports transfer through material airlocks

Peelable chevron end can be opened while wearing cleanroom gloves

Dry and pre-saturated chemistries can be matched to the cleaning procedure

Kebimbangan Produk Pelanggan

Aseptic-area wipes must arrive in a protected package, remain easy to transfer and provide enough wet strength for the intended cleaning motion. Large open packs can also increase exposure and unused-product waste.

Packaging surfaces may carry contamination between classified zones.Use nested cleanroom-compatible bags with clear staged-transfer procedures.

Opened bulk packs can expose unused wipes before they are needed.Select a pack count aligned with one room, shift or cleaning task.

Weak substrates may tear during disinfectant application.Specify a synthetic wipe with dependable wet strength and low fiber release.

An unsuitable solution load can leave surfaces too wet or dry too quickly.Choose dry wipes or a validated pre-saturated configuration for the site's contact-time requirements.

Permohonan yang biasa

Used for disinfectant application, residue removal, wiping-to-dry and critical-site cleaning in pharmaceutical aseptic suites, compounding areas, biotechnology production, medical-device assembly and controlled laboratories.

Parameter teknikal

The ranges below cover common sterile square wipe configurations. Substrate, pack count, sterilization method and pre-saturation chemistry are selected for the approved facility cleaning program.

Bahan Teras	Low-lint knitted or nonwoven polyester wipe substrate
Ketebalan Panel	0.30–0.65 mm
Lebar berkesan	100–310 mm
Panjang maksimum	310 mm
Keluli Menghadapi Ketebalan	0 mm; tiada keluli menghadap digunakan
Ketumpatan teras	70–160 kg/m³ apparent fabric density
Kekonduksian Terma	0.04–0.07 W/(m·K), substrate dependent
Kemasan permukaan	White low-lint wipe in clear double-barrier peel packaging
Jenis Bersatu	Sealed cut-edge or sealed-edge wipe with heat-sealed package perimeter
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Dry or pre-saturated formatKnitted polyester or hydroentangled nonwoven substrateSmall task packs or standard stack packsDouble- or triple-bag transfer packagingGamma-irradiated sterile configurationMultiple wipe sizes and edge finishes

Planning a Sterile Cleanroom Wipes specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami