Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
FFU y equipos de purificación de aire terminal
Unidad de filtro de ventilador de acero inoxidable
An all-welded brushed stainless steel FFU with sealed seams and cleanable hardware for sanitary, chemical-resistant or frequently wiped cleanroom ceilings.
- All-Welded Stainless Housing
- Cleanable Brushed Surfaces
- Sealed Hygienic Corners
- Room-Side Service Option
Introducción del producto
The stainless steel fan filter unit encloses the blower, pressure chamber and final filter in a formed 304 or 316 stainless casing. Continuous welded corner seams remove overlapping raw edges from exposed surfaces, and the brushed grain gives cleaning staff a consistent wipe direction. Stainless latches, a silicone perimeter gasket and a perforated stainless diffuser support hygienic maintenance on both the service and cleanroom sides. The construction is suitable where painted steel would be vulnerable to repeated chemical wiping, moisture or process residues.
Características clave
A uniform brushed finish limits glare while leaving a smooth surface that can be wiped in a controlled direction.
Stainless latches and fasteners avoid mixed exposed materials around frequently handled service points.
An optional room-side filter arrangement permits removal without opening an inaccessible interstitial ceiling space.
Preocupaciones del producto del cliente
A hygienic FFU must tolerate repeated cleaning while preventing seams, coatings and mixed-metal hardware from becoming contamination traps.
Paint chips at service-panel edges expose corroding base metal above a critical clean zone.A stainless housing provides corrosion resistance through the sheet thickness instead of relying on a surface coating.
Folded overlaps and unsealed corners retain liquid after ceiling cleaning.Continuous welded seams and flush corner finishing remove open crevices from the exposed enclosure.
Aggressive disinfectants stain or soften ordinary painted diffusers and fasteners.A brushed stainless diffuser, latches and hardware present a consistent cleanable material system.
Ceiling access is limited in sealed pharmaceutical suites.A room-side service option allows the filter and selected fan components to be reached from the clean zone.
Aplicaciones típicas
Aseptic pharmaceutical productionBiotechnology processing roomsFood and beverage clean areasHigh-humidity clean manufacturingFacilities using frequent chemical wipe-down
Parámetros técnicos
Typical materials and dimensional ranges for a hygienic stainless steel fan filter unit are provided below.
| Materiales Core | 304 or 316 stainless-steel plenum, backward-curved EC fan and micro-glass HEPA or ULPA filter pack |
|---|---|
| Panel de espesor | 300-420 mm overall module depth |
| Ancho efectivo | 575-1170 mm nominal ceiling-grid width |
| Longitud máxima | Up to 1170 mm standard module length |
| Acero frente a espesor | 1.0-1.5 mm 304 or 316 stainless-steel housing sheet |
| Densidad Core | Approximately 90-120 kg/m³ nominal compacted density of the micro-glass pack installed in the stainless-steel FFU |
| Conductividad térmica | Approximately 0.035-0.043 W/(m·K) for the dry final-filter pack enclosed by the stainless-steel FFU |
| Superficie acabada | No. 4 brushed stainless steel or optional electropolished exposed surfaces |
| Tipo conjunto | All-welded plenum with silicone ceiling gasket and gel-seal or compression-seal room-side filter interface |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
304 or 316 stainless steelNo. 4 brushed or electropolished finishTop-access or sanitary room-side service configurationStainless-framed HEPA or ULPA gel-seal filter
Planning a Stainless Steel Fan Filter Unit specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
