Three-quarter view of an all-welded brushed stainless steel fan filter unit

FFU dan Peralatan Penulenan Udara Terminal

Keluli tahan karat Fan Penapis Unit

An all-welded brushed stainless steel FFU with sealed seams and cleanable hardware for sanitary, chemical-resistant or frequently wiped cleanroom ceilings.

All-Welded Stainless Housing
Cleanable Brushed Surfaces
Sealed Hygienic Corners
Room-Side Service Option

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The stainless steel fan filter unit encloses the blower, pressure chamber and final filter in a formed 304 or 316 stainless casing. Continuous welded corner seams remove overlapping raw edges from exposed surfaces, and the brushed grain gives cleaning staff a consistent wipe direction. Stainless latches, a silicone perimeter gasket and a perforated stainless diffuser support hygienic maintenance on both the service and cleanroom sides. The construction is suitable where painted steel would be vulnerable to repeated chemical wiping, moisture or process residues.

Ciri-ciri Utama

Continuous welded seams close folded cavities that could otherwise retain moisture or cleaning residue.

A uniform brushed finish limits glare while leaving a smooth surface that can be wiped in a controlled direction.

Stainless latches and fasteners avoid mixed exposed materials around frequently handled service points.

An optional room-side filter arrangement permits removal without opening an inaccessible interstitial ceiling space.

Kebimbangan Produk Pelanggan

A hygienic FFU must tolerate repeated cleaning while preventing seams, coatings and mixed-metal hardware from becoming contamination traps.

Paint chips at service-panel edges expose corroding base metal above a critical clean zone.A stainless housing provides corrosion resistance through the sheet thickness instead of relying on a surface coating.

Folded overlaps and unsealed corners retain liquid after ceiling cleaning.Continuous welded seams and flush corner finishing remove open crevices from the exposed enclosure.

Aggressive disinfectants stain or soften ordinary painted diffusers and fasteners.A brushed stainless diffuser, latches and hardware present a consistent cleanable material system.

Ceiling access is limited in sealed pharmaceutical suites.A room-side service option allows the filter and selected fan components to be reached from the clean zone.

Permohonan yang biasa

Aseptic pharmaceutical productionBiotechnology processing roomsKawasan makanan dan minuman bersihHigh-humidity clean manufacturingFacilities using frequent chemical wipe-down

Parameter teknikal

Typical materials and dimensional ranges for a hygienic stainless steel fan filter unit are provided below.

Bahan Teras	304 or 316 stainless-steel plenum, backward-curved EC fan and micro-glass HEPA or ULPA filter pack
Ketebalan Panel	300-420 mm overall module depth
Lebar berkesan	575-1170 mm nominal ceiling-grid width
Panjang maksimum	Up to 1170 mm standard module length
Keluli Menghadapi Ketebalan	1.0-1.5 mm 304 or 316 stainless-steel housing sheet
Ketumpatan teras	Approximately 90-120 kg/m³ nominal compacted density of the micro-glass pack installed in the stainless-steel FFU
Kekonduksian Terma	Approximately 0.035-0.043 W/(m·K) for the dry final-filter pack enclosed by the stainless-steel FFU
Kemasan permukaan	No. 4 brushed stainless steel or optional electropolished exposed surfaces
Jenis Bersatu	All-welded plenum with silicone ceiling gasket and gel-seal or compression-seal room-side filter interface
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

304 or 316 stainless steelNo. 4 brushed or electropolished finishTop-access or sanitary room-side service configurationStainless-framed HEPA or ULPA gel-seal filter

Planning a Stainless Steel Fan Filter Unit specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami