Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pisos de sala limpia
Placas de piso de sala limpia de acero inoxidable
A durable stainless steel floor plate system with a cleanable raised pattern for controlled areas exposed to wash-down, rolling loads or moisture.
- 304 or 316L Stainless Steel
- Cleanable Raised Pattern
- Wet-Area Corrosion Resistance
- Welded Floor Layout
Introducción del producto
Stainless steel cleanroom floor plates form a hard-wearing surface where a conventional resin or vinyl finish may be vulnerable to repeated water exposure, concentrated wheel loads or mechanical impact. Each plate is cut from 304 or 316L stainless steel and can be supplied with a rounded-dot or checker pattern. Rounded projections improve shoe contact while leaving fewer tight recesses than a sharp diamond pattern. Plates are fitted over a sound supporting floor, aligned around equipment bases and drains, and joined with sealed or welded seams to create a robust installation that remains accessible to routine cleaning.
Características clave
Rounded or low-profile embossing adds walking grip while allowing cleaning tools to reach between projections.
Sheet widths and cut lengths can be planned around drains, machine plinths and service penetrations to reduce small infill pieces.
Welded and dressed plate joints provide a mechanically strong transition across frequently washed production floors.
Preocupaciones del producto del cliente
Metal flooring in a controlled environment must balance traction, cleanability and resistance to the loads concentrated at wheels, feet and equipment supports.
Smooth metal becomes difficult to walk on when rinse water reaches the floor.A rounded-dot or checker surface adds multidirectional shoe contact without applying a sacrificial coating.
Aggressive cleaning quickly exposes chips in painted carbon-steel flooring.Solid 304 or 316L stainless steel retains its corrosion-resistant material through the full plate thickness.
Sharp tread patterns retain residue around narrow corners after wash-down.The optional rounded embossing presents open drainage paths that are easier to sweep and rinse.
Thin sheet flexes and becomes noisy below carts at unsupported edges.Plate gauge, substrate support and welded edge layout are selected together for stable wheel travel.
Aplicaciones típicas
Pharmaceutical wash-down roomsClean utility and equipment areasFood and beverage hygiene zonesMaterial airlocks with wheeled trafficCleanroom service platforms and stairs
Parámetros técnicos
Representative material and fabrication data for hygienic stainless steel floor plates are listed below.
| Materiales Core | AISI 304 or 316L austenitic stainless steel floor plate |
|---|---|
| Panel de espesor | 3.0–6.0 mm base plate thickness, excluding the raised pattern |
| Ancho efectivo | 1000–1250 mm standard plate width |
| Longitud máxima | Up to 3000 mm common cut plate length |
| Acero frente a espesor | 3.0–6.0 mm solid stainless steel wearing plate |
| Densidad Core | Approximately 7900 kg/m³ for the austenitic stainless steel plate |
| Conductividad térmica | Approximately 14–21 W/(m·K), depending on the selected stainless steel grade |
| Superficie acabada | Mill-finished rounded-dot or checker embossing with optional brushed flat borders |
| Tipo conjunto | Supported butt joint with sealed or continuously welded and dressed stainless steel edges |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
AISI 304 or 316L gradeRounded-dot or checker embossing3.0, 4.5 or 6.0 mm base thicknessCut-outs, formed edges and welded drain interfaces
Planning a Stainless Steel Cleanroom Floor Plates specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
