Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Manejo y almacenamiento de materiales de sala limpia
Contenedor de sala limpia sellado
A sealed rectangular cleanroom container with a welded stainless body, closed stainless lid, blue elastomer perimeter gasket, four toggle clamps and two folding handles.
- Four-point lid compression maintains an even perimeter gasket seal
- Radiused stainless body exposes smooth surfaces for controlled cleaning
- Low rectangular form stacks space efficiently on carts and shelves
Introducción del producto
Designed for closed internal movement, this container combines a shallow rectangular stainless body with a close-fitting lid and continuous replaceable gasket. Two front clamps and one clamp on each side distribute closure force around the rim. Folding handles stay close to the side walls when the container is parked, and the flat base supports stable placement on clean carts, worktables or shelving.
Características clave
Rounded body corners reduce sharp internal transitions and simplify wiping.
Replaceable perimeter gasket separates the stainless lid from the vessel rim.
Folding side handles limit protrusions during storage and cart transport.
Flat stainless exterior tolerates repeated non-abrasive cleanroom cleaning.
Preocupaciones del producto del cliente
Open totes expose contents, tall cylindrical vessels waste shelf depth, and uneven lid pressure can leave localized gaps along a long rectangular rim.
Perimeter leakage pathsFour distributed clamps apply closure force at the front and both sides.
Difficult corner cleaningFormed radii and welded stainless construction minimize abrupt internal ledges.
Handles obstructing storageFolding grips lie against the side walls when they are not being used.
Gasket compatibilitySilicone, EPDM or FKM can be selected for the cleaning agents and stored contents.
Aplicaciones típicas
Protected transfer and short-term staging of sterile packs, cleaned tooling, sampled components, sensitive assemblies and sealed process accessories between cleanroom work cells.
Parámetros técnicos
The body is formed with generous corner radii and welded to a flat base before surface finishing. Lid flange, gasket section and toggle-clamp geometry work as one closure system; changing one component requires checking compression and fit. The design is intended to limit particulate, splash and ambient-moisture ingress during controlled handling, not for pressurized storage unless separately engineered.
| Materiales Core | 304 or 316L stainless steel body and lid with silicone, EPDM or FKM gasket |
|---|---|
| Panel de espesor | 0.8–1.5 mm formed container and lid panels |
| Ancho efectivo | 240–600 mm usable internal width |
| Longitud máxima | Up to 1000 mm overall container length |
| Acero frente a espesor | 0.8–1.5 mm exposed stainless steel surfaces |
| Densidad Core | 7900 - 8000 kg / m3 Densidad nominal de acero inoxidable por |
| Conductividad térmica | 14.6 - 16.2 W / (m · K) a temperatura ambiente por |
| Superficie acabada | Fine-brushed, polished or electropolished stainless steel with smooth radiused corners |
| Tipo conjunto | Continuously welded formed body with gasketed fitted lid and four over-centre toggle clamps |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
304 or 316L stainless steel, custom footprint and depth, silicone, EPDM or FKM gasket, electropolished finish, tamper-evident latch provision, stackable rim, removable divider, identification holder and matching trolley frame.
Planning a Sealed Cleanroom Container specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
