Complete sealed cleanroom container in front-left three-quarter view

Penanganan dan Penyimpanan Bahan Cleanroom

Kontainer Cleanroom yang disegel

A sealed rectangular cleanroom container with a welded stainless body, closed stainless lid, blue elastomer perimeter gasket, four toggle clamps and two folding handles.

Four-point lid compression maintains an even perimeter gasket seal
Radiused stainless body exposes smooth surfaces for controlled cleaning
Low rectangular form stacks space efficiently on carts and shelves

Permintaan untuk kutipan Browse Produk

Perkenalan produk

Designed for closed internal movement, this container combines a shallow rectangular stainless body with a close-fitting lid and continuous replaceable gasket. Two front clamps and one clamp on each side distribute closure force around the rim. Folding handles stay close to the side walls when the container is parked, and the flat base supports stable placement on clean carts, worktables or shelving.

Fitur utama:

Multiple closure points compress the lid more evenly than a single central latch.

Rounded body corners reduce sharp internal transitions and simplify wiping.

Replaceable perimeter gasket separates the stainless lid from the vessel rim.

Folding side handles limit protrusions during storage and cart transport.

Flat stainless exterior tolerates repeated non-abrasive cleanroom cleaning.

Kekhawatiran produk pelanggan

Open totes expose contents, tall cylindrical vessels waste shelf depth, and uneven lid pressure can leave localized gaps along a long rectangular rim.

Perimeter leakage pathsFour distributed clamps apply closure force at the front and both sides.

Difficult corner cleaningFormed radii and welded stainless construction minimize abrupt internal ledges.

Handles obstructing storageFolding grips lie against the side walls when they are not being used.

Gasket compatibilitySilicone, EPDM or FKM can be selected for the cleaning agents and stored contents.

Aplikasi yang Tipis

Protected transfer and short-term staging of sterile packs, cleaned tooling, sampled components, sensitive assemblies and sealed process accessories between cleanroom work cells.

Parameter teknis

The body is formed with generous corner radii and welded to a flat base before surface finishing. Lid flange, gasket section and toggle-clamp geometry work as one closure system; changing one component requires checking compression and fit. The design is intended to limit particulate, splash and ambient-moisture ingress during controlled handling, not for pressurized storage unless separately engineered.

Bahan inti	304 or 316L stainless steel body and lid with silicone, EPDM or FKM gasket
Ketebalan Panel (Panel Thickness)	0.8–1.5 mm formed container and lid panels
Efektif lebar	240–600 mm usable internal width
Panjang maksimum	Up to 1000 mm overall container length
Baja menghadap ketebalan	0.8–1.5 mm exposed stainless steel surfaces
Kepadatan inti (core density)	7900–8000 kg/m³ nominal stainless steel density
Konduktivitas Termal (Thermal Conductivity)	Sekitar 14,6 - 16,2 W / (m · K) pada suhu kamar
Permukaan selesai	Fine-brushed, polished or electropolished stainless steel with smooth radiused corners
Jenis Bersama	Continuously welded formed body with gasketed fitted lid and four over-centre toggle clamps
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

304 or 316L stainless steel, custom footprint and depth, silicone, EPDM or FKM gasket, electropolished finish, tamper-evident latch provision, stackable rim, removable divider, identification holder and matching trolley frame.

Planning a Sealed Cleanroom Container specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami