Complete sealed cleanroom container in front-left three-quarter view

クリーンルーム材料の取り扱い · 貯蔵

密封されたクリーンルームの容器

A sealed rectangular cleanroom container with a welded stainless body, closed stainless lid, blue elastomer perimeter gasket, four toggle clamps and two folding handles.

Four-point lid compression maintains an even perimeter gasket seal
Radiused stainless body exposes smooth surfaces for controlled cleaning
Low rectangular form stacks space efficiently on carts and shelves

見積もりリクエスト製品案内

商品紹介

Designed for closed internal movement, this container combines a shallow rectangular stainless body with a close-fitting lid and continuous replaceable gasket. Two front clamps and one clamp on each side distribute closure force around the rim. Folding handles stay close to the side walls when the container is parked, and the flat base supports stable placement on clean carts, worktables or shelving.

主要な特徴

Multiple closure points compress the lid more evenly than a single central latch.

Rounded body corners reduce sharp internal transitions and simplify wiping.

Replaceable perimeter gasket separates the stainless lid from the vessel rim.

Folding side handles limit protrusions during storage and cart transport.

Flat stainless exterior tolerates repeated non-abrasive cleanroom cleaning.

お客様の製品に関する懸念事項

Open totes expose contents, tall cylindrical vessels waste shelf depth, and uneven lid pressure can leave localized gaps along a long rectangular rim.

Perimeter leakage pathsFour distributed clamps apply closure force at the front and both sides.

Difficult corner cleaningFormed radii and welded stainless construction minimize abrupt internal ledges.

Handles obstructing storageFolding grips lie against the side walls when they are not being used.

Gasket compatibilitySilicone, EPDM or FKM can be selected for the cleaning agents and stored contents.

典型的な用途

Protected transfer and short-term staging of sterile packs, cleaned tooling, sampled components, sensitive assemblies and sealed process accessories between cleanroom work cells.

技術的なパラメータ

The body is formed with generous corner radii and welded to a flat base before surface finishing. Lid flange, gasket section and toggle-clamp geometry work as one closure system; changing one component requires checking compression and fit. The design is intended to limit particulate, splash and ambient-moisture ingress during controlled handling, not for pressurized storage unless separately engineered.

コア材料	304 or 316L stainless steel body and lid with silicone, EPDM or FKM gasket
パネルの厚さ	0.8–1.5 mm formed container and lid panels
有効幅	240–600 mm usable internal width
最大長さ	Up to 1000 mm overall container length
鋼鉄の厚さを直面する	0.8–1.5 mm exposed stainless steel surfaces
コア密度	7900–8000 kg/m³ nominal stainless steel density
熱伝導率	室温で約 14.6 — 16.2 W / （m · K）
表面仕上げ	Fine-brushed, polished or electropolished stainless steel with smooth radiused corners
ジョイントタイプ	Continuously welded formed body with gasketed fitted lid and four over-centre toggle clamps
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

304 or 316L stainless steel, custom footprint and depth, silicone, EPDM or FKM gasket, electropolished finish, tamper-evident latch provision, stackable rim, removable divider, identification holder and matching trolley frame.

Planning a Sealed Cleanroom Container specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する