Complete sealed cleanroom container in front-left three-quarter view

클린룸 재료 취급 및 보관

밀봉된 클린룸 컨테이너

A sealed rectangular cleanroom container with a welded stainless body, closed stainless lid, blue elastomer perimeter gasket, four toggle clamps and two folding handles.

Four-point lid compression maintains an even perimeter gasket seal
Radiused stainless body exposes smooth surfaces for controlled cleaning
Low rectangular form stacks space efficiently on carts and shelves

견적 요청 제품 찾아보기

상품 소개

Designed for closed internal movement, this container combines a shallow rectangular stainless body with a close-fitting lid and continuous replaceable gasket. Two front clamps and one clamp on each side distribute closure force around the rim. Folding handles stay close to the side walls when the container is parked, and the flat base supports stable placement on clean carts, worktables or shelving.

주요 기능

Multiple closure points compress the lid more evenly than a single central latch.

Rounded body corners reduce sharp internal transitions and simplify wiping.

Replaceable perimeter gasket separates the stainless lid from the vessel rim.

Folding side handles limit protrusions during storage and cart transport.

Flat stainless exterior tolerates repeated non-abrasive cleanroom cleaning.

고객 제품 관심사

Open totes expose contents, tall cylindrical vessels waste shelf depth, and uneven lid pressure can leave localized gaps along a long rectangular rim.

Perimeter leakage pathsFour distributed clamps apply closure force at the front and both sides.

Difficult corner cleaningFormed radii and welded stainless construction minimize abrupt internal ledges.

Handles obstructing storageFolding grips lie against the side walls when they are not being used.

Gasket compatibilitySilicone, EPDM or FKM can be selected for the cleaning agents and stored contents.

일반적인 응용 프로그램

Protected transfer and short-term staging of sterile packs, cleaned tooling, sampled components, sensitive assemblies and sealed process accessories between cleanroom work cells.

기술 매개변수

The body is formed with generous corner radii and welded to a flat base before surface finishing. Lid flange, gasket section and toggle-clamp geometry work as one closure system; changing one component requires checking compression and fit. The design is intended to limit particulate, splash and ambient-moisture ingress during controlled handling, not for pressurized storage unless separately engineered.

핵심 재료	304 or 316L stainless steel body and lid with silicone, EPDM or FKM gasket
패널 두께	0.8–1.5 mm formed container and lid panels
유효 폭	240–600 mm usable internal width
최대 길이	Up to 1000 mm overall container length
강철 면면 두께	0.8–1.5 mm exposed stainless steel surfaces
코어 밀도	7900 - 8000 kg / m 3 명칭 스테인레스 강철 밀도
열전도도 (Thermal Conductivity)	약 14. 6 - 16. 2 W / (m · K) 실온에서
표면 마무리	Fine-brushed, polished or electropolished stainless steel with smooth radiused corners
접합 유형	Continuously welded formed body with gasketed fitted lid and four over-centre toggle clamps
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

304 or 316L stainless steel, custom footprint and depth, silicone, EPDM or FKM gasket, electropolished finish, tamper-evident latch provision, stackable rim, removable divider, identification holder and matching trolley frame.

Planning a Sealed Cleanroom Container specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.