Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de HVAC y manejo de aire para salas limpias
Unidad de manejo de aire horizontal
A floor-mounted linear air handler that arranges treatment components in an accessible horizontal airflow path.
- Straight Airflow Path
- Full-Side Service Access
- Low Component Velocity
- Flexible Section Length
Introducción del producto
The horizontal air handling unit places dampers, filters, coils and fans in a straight line on a rigid floor base. The layout offers generous face area for filters and coils, helping reduce pressure loss and water carryover. Service doors can reach each section from one side, and the unit height can be kept below roof beams or service distribution. Draw-through and blow-through arrangements are available to suit coil control, fan heat and discharge requirements.
Características clave
Large filter and coil face areas improve service life and moisture separation.
Full-height side doors make each treatment section independently accessible.
Section lengths can be adjusted for coil access, sound attenuation and building column spacing.
Preocupaciones del producto del cliente
Long floor-mounted equipment must balance low pressure drop with plant-room access, shipping limits and service clearances.
High coil face velocity carries condensate into the downstream fan section.A wider coil face and adequate service plenum reduce velocity and allow drainage.
One continuous casing cannot pass around plant-room columns or through delivery openings.Bolted shipping sections reassemble on a continuous aligned base frame.
Filters can only be changed from the wrong side of the plant room.Service handing and door positions are selected before manufacture.
A short discharge plenum creates uneven fan outlet velocity at the duct connection.A sized discharge section provides pressure recovery and a uniform duct interface.
Aplicaciones típicas
Cleanroom mechanical roomsPharmaceutical manufacturing HVACLaboratory air treatmentHospital supply-air systemsIndustrial clean facilities
Parámetros técnicos
Representative construction data for a floor-mounted horizontal AHU are provided below.
| Materiales Core | Polyurethane foam or mineral-wool insulation in double-skin panels |
|---|---|
| Panel de espesor | 40–70 mm insulated casing |
| Ancho efectivo | 900–4000 mm nominal unit width |
| Longitud máxima | Up to 15000 mm in bolted horizontal shipping sections |
| Acero frente a espesor | 0.6–1.0 mm inner and outer panel skins |
| Densidad Core | 40–43 kg/m³ polyurethane or 90–120 kg/m³ mineral wool |
| Conductividad térmica | 0.022–0.040 W/(m·K) depending on insulation |
| Superficie acabada | Powder-coated galvanized outer skin with galvanized or stainless inner skin |
| Tipo conjunto | Thermal-break frame with gasketed panels and bolted aligned base sections |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Draw-through or blow-through arrangementSingle fan, twin fan or fan-wall sectionTop, side or end duct connectionsSound attenuator and discharge plenum modules
Planning a Horizontal Air Handling Unit specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
