Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Filtro de aire y filtración química
Filtro de alta eficiencia de flujo de aire
A reinforced extended-surface filter built to process higher air volumes while maintaining open channels through a deep supported media pack.
- High Face Velocity
- Reinforced Metal Cell
- Open Deep-Pleat Channels
- Large Dust Storage
Introducción del producto
The high-airflow medium-efficiency filter combines a deep extended-surface media pack with rigid galvanized or aluminized-steel cell sides, protective faceguards and structural support straps. Corrugated separators or stabilized pleat spacers maintain open channels through the full depth of the pack as face velocity rises. A high-loft microglass or synthetic medium stores particles through its depth, while the rigid header resists the pulsation and turbulence found in large air handlers and process-air inlets. This construction emphasizes mechanical stability and airflow capacity rather than minimum cabinet depth.
Características clave
Corrugated separators preserve full-length channels under turbulent inlet conditions.
Metal faceguards and cross straps protect the pack from bowing and handling damage.
A high-strength enclosing cell keeps the gasket plane flat under sustained differential pressure.
Preocupaciones del producto del cliente
High-volume systems expose filter packs to turbulence, pulsation and structural loads that ordinary medium filters may not withstand.
Increasing airflow sharply raises pressure drop through a small media pack.A full-depth extended-surface pack lowers velocity at the media and preserves open flow channels.
Turbulent inlet air bows the pleats and damages the pack perimeter.Corrugated separators, faceguards and support straps share the load across the rigid cell.
Repeated fan starts loosen the internal pack-to-frame bond.Deep polyurethane potting anchors the entire media perimeter inside the metal cell.
A distorted header leaves compression gaps along the filter bank.Reinforced galvanized cell sides maintain a flat gasket surface at high operating pressure.
Aplicaciones típicas
Large central air-handling unitsCleanroom make-up-air plantsProcess ventilation systemsIndustrial supply-air filtrationHigh-volume turbine and compressor intake prefiltration
Parámetros técnicos
Typical construction ranges for a reinforced high-airflow medium-efficiency filter are listed below.
| Materiales Core | High-loft microglass or synthetic media with corrugated aluminum or hot-melt separators |
|---|---|
| Panel de espesor | 292 mm nominal extended-surface depth |
| Ancho efectivo | 305-610 mm modular face width |
| Longitud máxima | Up to 610 mm standard face length |
| Acero frente a espesor | 0.80-1.20 mm galvanized or aluminized-steel cell sides and faceguards |
| Densidad Core | Approximately 80-135 kg/m³ nominal supported media-pack density |
| Conductividad térmica | Approximately 0.034-0.043 W/(m·K) for the dry filter medium |
| Superficie acabada | Mill-galvanized or aluminized-steel cell with white media and metallic faceguards |
| Tipo conjunto | Deep pleated pack potted into a reinforced rigid cell with single or double header |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
MERV 11 or MERV 14 mediaStandard- or high-capacity pleat packSingle-header or double-header cellUpstream prefilter clips and heavy-duty faceguards
Planning a High-Airflow Medium-Efficiency Filter specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
