Three-quarter view of a reinforced high-airflow medium-efficiency filter

エアフィルターと化学ろ過

高気流中効率フィルター

A reinforced extended-surface filter built to process higher air volumes while maintaining open channels through a deep supported media pack.

High Face Velocity
Reinforced Metal Cell
Open Deep-Pleat Channels
Large Dust Storage

見積もりリクエスト製品案内

商品紹介

The high-airflow medium-efficiency filter combines a deep extended-surface media pack with rigid galvanized or aluminized-steel cell sides, protective faceguards and structural support straps. Corrugated separators or stabilized pleat spacers maintain open channels through the full depth of the pack as face velocity rises. A high-loft microglass or synthetic medium stores particles through its depth, while the rigid header resists the pulsation and turbulence found in large air handlers and process-air inlets. This construction emphasizes mechanical stability and airflow capacity rather than minimum cabinet depth.

主要な特徴

A deep pack exposes enough media area for elevated airflow without excessive local media velocity.

Corrugated separators preserve full-length channels under turbulent inlet conditions.

Metal faceguards and cross straps protect the pack from bowing and handling damage.

A high-strength enclosing cell keeps the gasket plane flat under sustained differential pressure.

お客様の製品に関する懸念事項

High-volume systems expose filter packs to turbulence, pulsation and structural loads that ordinary medium filters may not withstand.

Increasing airflow sharply raises pressure drop through a small media pack.A full-depth extended-surface pack lowers velocity at the media and preserves open flow channels.

Turbulent inlet air bows the pleats and damages the pack perimeter.Corrugated separators, faceguards and support straps share the load across the rigid cell.

Repeated fan starts loosen the internal pack-to-frame bond.Deep polyurethane potting anchors the entire media perimeter inside the metal cell.

A distorted header leaves compression gaps along the filter bank.Reinforced galvanized cell sides maintain a flat gasket surface at high operating pressure.

典型的な用途

Large central air-handling unitsCleanroom make-up-air plantsProcess ventilation systemsIndustrial supply-air filtrationHigh-volume turbine and compressor intake prefiltration

技術的なパラメータ

Typical construction ranges for a reinforced high-airflow medium-efficiency filter are listed below.

コア材料	High-loft microglass or synthetic media with corrugated aluminum or hot-melt separators
パネルの厚さ	292 mm nominal extended-surface depth
有効幅	305-610 mm modular face width
最大長さ	Up to 610 mm standard face length
鋼鉄の厚さを直面する	0.80-1.20 mm galvanized or aluminized-steel cell sides and faceguards
コア密度	Approximately 80-135 kg/m³ nominal supported media-pack density
熱伝導率	Approximately 0.034-0.043 W/(m·K) for the dry filter medium
表面仕上げ	Mill-galvanized or aluminized-steel cell with white media and metallic faceguards
ジョイントタイプ	Deep pleated pack potted into a reinforced rigid cell with single or double header
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

MERV 11 or MERV 14 mediaStandard- or high-capacity pleat packSingle-header or double-header cellUpstream prefilter clips and heavy-duty faceguards

Planning a High-Airflow Medium-Efficiency Filter specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する