Three-quarter view of a reinforced high-airflow medium-efficiency filter

공기 필터 및 화학 여과

High - Airflow Medium - Efficiency 필터

A reinforced extended-surface filter built to process higher air volumes while maintaining open channels through a deep supported media pack.

High Face Velocity
Reinforced Metal Cell
Open Deep-Pleat Channels
Large Dust Storage

견적 요청 제품 찾아보기

상품 소개

The high-airflow medium-efficiency filter combines a deep extended-surface media pack with rigid galvanized or aluminized-steel cell sides, protective faceguards and structural support straps. Corrugated separators or stabilized pleat spacers maintain open channels through the full depth of the pack as face velocity rises. A high-loft microglass or synthetic medium stores particles through its depth, while the rigid header resists the pulsation and turbulence found in large air handlers and process-air inlets. This construction emphasizes mechanical stability and airflow capacity rather than minimum cabinet depth.

주요 기능

A deep pack exposes enough media area for elevated airflow without excessive local media velocity.

Corrugated separators preserve full-length channels under turbulent inlet conditions.

Metal faceguards and cross straps protect the pack from bowing and handling damage.

A high-strength enclosing cell keeps the gasket plane flat under sustained differential pressure.

고객 제품 관심사

High-volume systems expose filter packs to turbulence, pulsation and structural loads that ordinary medium filters may not withstand.

Increasing airflow sharply raises pressure drop through a small media pack.A full-depth extended-surface pack lowers velocity at the media and preserves open flow channels.

Turbulent inlet air bows the pleats and damages the pack perimeter.Corrugated separators, faceguards and support straps share the load across the rigid cell.

Repeated fan starts loosen the internal pack-to-frame bond.Deep polyurethane potting anchors the entire media perimeter inside the metal cell.

A distorted header leaves compression gaps along the filter bank.Reinforced galvanized cell sides maintain a flat gasket surface at high operating pressure.

일반적인 응용 프로그램

Large central air-handling unitsCleanroom make-up-air plantsProcess ventilation systemsIndustrial supply-air filtrationHigh-volume turbine and compressor intake prefiltration

기술 매개변수

Typical construction ranges for a reinforced high-airflow medium-efficiency filter are listed below.

핵심 재료	High-loft microglass or synthetic media with corrugated aluminum or hot-melt separators
패널 두께	292 mm nominal extended-surface depth
유효 폭	305-610 mm modular face width
최대 길이	최대 610 mm 표준 면 길이
강철 면면 두께	0.80-1.20 mm galvanized or aluminized-steel cell sides and faceguards
코어 밀도	Approximately 80-135 kg/m³ nominal supported media-pack density
열전도도 (Thermal Conductivity)	Approximately 0.034-0.043 W/(m·K) for the dry filter medium
표면 마무리	Mill-galvanized or aluminized-steel cell with white media and metallic faceguards
접합 유형	Deep pleated pack potted into a reinforced rigid cell with single or double header
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

MERV 11 or MERV 14 mediaStandard- or high-capacity pleat packSingle-header or double-header cellUpstream prefilter clips and heavy-duty faceguards

Planning a High-Airflow Medium-Efficiency Filter specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.