Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Filtro de aire y filtración química
Filtro HEPA Seal
A rigid HEPA panel fitted with a closed-cell perimeter gasket that seals against a flat housing flange under controlled compression.
- Closed-Cell Compression Gasket
- Flat-Flange Compatibility
- Simple Visual Inspection
- Replaceable Seal Option
Introducción del producto
The gasket-seal HEPA filter uses a flat closed-cell neoprene, EPDM or polyurethane gasket bonded to the upstream or downstream flange of an anodized-aluminum, galvanized or wood cell. Retaining clips or a clamping mechanism compress the gasket uniformly against the housing's flat sealing face. The mini-pleat or separator-style HEPA pack is potted independently into the cell, while dovetailed or continuously poured gasket corners prevent leakage at the perimeter joints. This familiar dry-seal arrangement suits built-up banks and terminal frames with accessible, flat mating surfaces.
Características clave
A broad flat gasket face is easy to inspect for dirt, tears and incomplete contact before installation.
Dovetailed or seamless corners maintain continuity around the complete perimeter.
Upstream and downstream gasket positions accommodate different filter-bank loading directions.
Preocupaciones del producto del cliente
Dry gasket seals depend on clean mating surfaces and uniform compression around every side of the filter frame.
Uneven clamp force leaves one corner of the filter unsealed.A resilient full-width gasket and distributed retaining points maintain perimeter compression.
Open-cell foam allows leakage through the gasket body.Closed-cell neoprene, EPDM or polyurethane provides a low-permeability compression barrier.
Butt-jointed gasket corners separate during filter handling.Dovetailed interlocking corners or a continuously poured gasket remove straight-through corner gaps.
Repeated replacement leaves adhesive residue and a distorted seal face.A replaceable preformed gasket and clean flat flange simplify inspection and renewal.
Aplicaciones típicas
Built-up HEPA filter banksFront-access air-handling unitsCleanroom terminal housingsHospital and laboratory ventilationPharmaceutical supply and return systems
Parámetros técnicos
Typical construction ranges for a compression gasket-seal HEPA filter are listed below.
| Materiales Core | Mini-pleated microglass or membrane HEPA media; separator pack available for full-depth cells |
|---|---|
| Panel de espesor | 70-120 mm mini-pleat panel or 150-292 mm separator cell depth |
| Ancho efectivo | 305-610 mm modular face width |
| Longitud máxima | Up to 1220 mm for reinforced mini-pleat panels |
| Acero frente a espesor | 0.40-0.80 mm galvanized or stainless-steel protective faceguard |
| Densidad Core | Approximately 85-155 kg/m³ nominal assembled media-pack density |
| Conductividad térmica | Approximately 0.034-0.041 W/(m·K) for dry gasketed microglass filter media |
| Superficie acabada | Anodized aluminum, galvanized steel or sealed wood with black or white closed-cell gasket |
| Tipo conjunto | Closed-cell perimeter gasket compressed against a clean flat housing flange |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
H13, H14 or 99.97-99.999% at 0.3 µmNeoprene, EPDM or polyurethane gasketUpstream, downstream or dual-face gasketDovetailed preformed or seamless poured corners
Planning a Gasket-Seal HEPA Filter specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
