Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de distribución de aire para salas limpias
Sala limpia Pressure Relief Damper
A finely balanced wall or duct damper that opens above an adjustable pressure differential and closes as the cleanroom returns to its intended cascade.
- Adjustable Differential Setpoint
- Balanced Aerofoil Relief Blade
- Wall or Duct Installation
- Gravity Return Closure
Introducción del producto
The cleanroom pressure relief damper uses a low-friction pivoted aerofoil blade and adjustable balance weights to bleed excess air from a positive room. When the differential rises above the selected opening value, blade torque overcomes the balance and the damper opens progressively. As room pressure falls, gravity and the counterweight return the blade toward the sealed position. A wall sleeve, protective grille and accessible weight rail allow the unit to be integrated into clean partitions without exposing the moving mechanism to routine traffic.
Características clave
Movable weights allow the opening threshold to be adjusted for the intended cleanroom cascade.
Progressive blade travel relieves increasing airflow while avoiding the abrupt full-open action of a simple flap.
Wall, partition and duct configurations accept protective grilles and cleanable powder-coated finishes.
Preocupaciones del producto del cliente
Room-pressure relief must respond at only a few pascals, avoid chatter and close against reverse contamination flow when the positive differential disappears.
Door opening effort rises because the room has no controlled path for excess supply air.The balanced blade opens at the selected differential and releases only the airflow needed to limit overpressure.
A crude gravity flap oscillates as the room controller trims the supply airflow.Aerofoil blade geometry and distributed counterweights provide smoother progressive travel around the setpoint.
Reverse airflow enters when an adjacent room briefly becomes more positive.Gravity return and blade seals close the transfer path as soon as the intended pressure direction is lost.
The counterweight setting is inaccessible after the damper is installed in the wall.A removable clean-side grille exposes the calibrated weight rail without dismantling the sleeve.
Aplicaciones típicas
Pharmaceutical cleanroom pressure cascadesOperating theatre suitesLaboratory pressure transfer pathsDispositivos médicos Asamblea limpiaAirlocks and gowning rooms
Parámetros técnicos
Typical construction ranges for a wall-mounted cleanroom pressure relief damper are listed below.
| Materiales Core | Extruded aluminum aerofoil blade with stainless pivots, elastomer seals and adjustable steel counterweights |
|---|---|
| Panel de espesor | 20–35 mm hollow aerofoil blade depth |
| Ancho efectivo | 300–900 mm nominal free opening width |
| Longitud máxima | Up to 1275 mm modular frame height |
| Acero frente a espesor | 1.0–1.5 mm powder-coated sleeve, grille and counterweight support |
| Densidad Core | Approximately 2700 kg/m³ for the aluminum relief blade |
| Conductividad térmica | Approximately 160–205 W/(m·K) for the aluminum blade section |
| Superficie acabada | White powder-coated frame and grille with natural or coated aluminum blade |
| Tipo conjunto | Through-wall or flanged duct sleeve with pivoted balanced blade, perimeter seal and removable grille |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Factory opening range from 15 to 75 PaClean-side or service-side weight accessProtective grille or weather louverPowder-coated aluminum or stainless-steel construction
Planning a Cleanroom Pressure Relief Damper specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
