Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Luftverteilungssysteme
Reinraum Druckentlastung Damper
A finely balanced wall or duct damper that opens above an adjustable pressure differential and closes as the cleanroom returns to its intended cascade.
- Adjustable Differential Setpoint
- Balanced Aerofoil Relief Blade
- Wall or Duct Installation
- Gravity Return Closure
Produkteinführung
The cleanroom pressure relief damper uses a low-friction pivoted aerofoil blade and adjustable balance weights to bleed excess air from a positive room. When the differential rises above the selected opening value, blade torque overcomes the balance and the damper opens progressively. As room pressure falls, gravity and the counterweight return the blade toward the sealed position. A wall sleeve, protective grille and accessible weight rail allow the unit to be integrated into clean partitions without exposing the moving mechanism to routine traffic.
Key Features
Movable weights allow the opening threshold to be adjusted for the intended cleanroom cascade.
Progressive blade travel relieves increasing airflow while avoiding the abrupt full-open action of a simple flap.
Wall, partition and duct configurations accept protective grilles and cleanable powder-coated finishes.
Kunden Produktbedenken
Room-pressure relief must respond at only a few pascals, avoid chatter and close against reverse contamination flow when the positive differential disappears.
Door opening effort rises because the room has no controlled path for excess supply air.The balanced blade opens at the selected differential and releases only the airflow needed to limit overpressure.
A crude gravity flap oscillates as the room controller trims the supply airflow.Aerofoil blade geometry and distributed counterweights provide smoother progressive travel around the setpoint.
Reverse airflow enters when an adjacent room briefly becomes more positive.Gravity return and blade seals close the transfer path as soon as the intended pressure direction is lost.
The counterweight setting is inaccessible after the damper is installed in the wall.A removable clean-side grille exposes the calibrated weight rail without dismantling the sleeve.
Typische Anwendungen
Pharmaceutical cleanroom pressure cascadesOperating theatre suitesLaboratory pressure transfer pathsMedizinische Geräte Clean AssemblyAirlocks and gowning rooms
Technische Parameter
Typical construction ranges for a wall-mounted cleanroom pressure relief damper are listed below.
| Core Material | Extruded aluminum aerofoil blade with stainless pivots, elastomer seals and adjustable steel counterweights |
|---|---|
| Panel Dicke | 20–35 mm hollow aerofoil blade depth |
| Effektive Breite | 300–900 mm nominal free opening width |
| Maximale Länge | Up to 1275 mm modular frame height |
| Stahl facing Dicke | 1.0–1.5 mm powder-coated sleeve, grille and counterweight support |
| Kerndichte | Approximately 2700 kg/m³ for the aluminum relief blade |
| Thermische Leitfähigkeit | Approximately 160–205 W/(m·K) for the aluminum blade section |
| Oberfläche Finish | White powder-coated frame and grille with natural or coated aluminum blade |
| Gemeinsamer Typ | Through-wall or flanged duct sleeve with pivoted balanced blade, perimeter seal and removable grille |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Factory opening range from 15 to 75 PaClean-side or service-side weight accessProtective grille or weather louverPowder-coated aluminum or stainless-steel construction
Planning a Cleanroom Pressure Relief Damper specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
