Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de HVAC y manejo de aire para salas limpias
Unidad de aire acondicionado de expansión directa para sala limpia
A cleanroom air-conditioning package that uses a refrigerant evaporator coil for direct sensible cooling and dehumidification without a chilled-water circuit.
- Direct Refrigerant Cooling
- Matched Condensing System
- Controlled Dehumidification
- Cleanroom Filter Staging
Introducción del producto
The cleanroom direct-expansion air-conditioning unit combines a refrigerant evaporator coil with cleanable filters, a drainable condensate section and variable-speed supply fan. A matched outdoor condensing unit or remote condenser rejects heat without requiring a central chilled-water plant. Multiple compressor stages or inverter capacity allow the coil to follow varying cleanroom load, while reheat can stabilize room temperature during dehumidification. Refrigerant piping, oil return and coil distribution are designed for the selected distance and lift.
Características clave
Variable or multi-stage compressor capacity reduces cycling under partial sensible load.
A drainable insulated coil section contains condensate produced during moisture removal.
Reheat and fan-speed control support temperature stability during latent operation.
Preocupaciones del producto del cliente
DX systems must match refrigerant capacity, air volume and coil temperature closely to avoid cycling, water carryover and unstable humidity.
A single large compressor repeatedly starts and stops at low cleanroom load.Inverter or staged compressors modulate closer to the active sensible and latent demand.
An unevenly fed evaporator leaves parts of the coil warm and reduces dehumidification.Matched distributors and expansion control maintain stable refrigerant feed across circuits.
Condensate is carried downstream during high latent load.Proper coil face velocity, eliminator clearance and a full drain pan control water.
Long refrigerant piping causes oil-return and capacity problems.Pipe size, traps and allowable lift are selected for the matched compressor and circuit.
Aplicaciones típicas
Independent cleanroom suitesMedical-device assembly roomsSmall pharmaceutical laboratoriesElectronics test areasCleanroom retrofit projects
Parámetros técnicos
Representative casing values for a cleanroom DX air-conditioning unit are shown below.
| Materiales Core | Closed-cell polyurethane insulation in double-skin indoor-unit panels |
|---|---|
| Panel de espesor | 40–60 mm insulated casing |
| Ancho efectivo | 700–2400 mm nominal indoor-unit width |
| Longitud máxima | Up to 5500 mm including filters, evaporator, reheat and fan |
| Acero frente a espesor | 0.6–1.0 mm coated casing sheet |
| Densidad Core | 40–45 kg/m³ closed-cell polyurethane |
| Conductividad térmica | 0.022–0.026 W/(m·K) for panel insulation |
| Superficie acabada | Powder-coated outer casing with galvanized or stainless wet-section liner |
| Tipo conjunto | Gasketed low-leakage panels with brazed refrigerant headers and flexible duct collars |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Air-cooled or water-cooled condensing unitFixed-stage or inverter compressorHot-gas, electric or hot-water reheatRemote controller and building-management interface
Planning a Cleanroom Direct-Expansion Air Conditioning Unit specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
