Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de utilidad de Cleanroom
Filtro de vapor limpio
A single-round 316L sanitary filter assembly that captures particulate contamination from clean steam through a removable sintered stainless-steel cartridge.
- Single 316L sintered cartridge
- Low-hold-up vented housing
- Drainable sanitary interfaces
Introducción del producto
The Clean Steam Filter is an inline hygienic housing for final particulate control in clean-steam services feeding sterilizers, SIP circuits, humidifiers and sensitive process users. Steam enters the compact upper head, passes through one cylindrical sintered 316L cartridge and leaves through the opposing sanitary outlet while retained scale, weld residue and pipe-borne debris remain within the metallic depth structure. A clamp-secured two-piece housing permits direct cartridge access, and dedicated top-vent and bottom-drain connections help remove trapped air and condensate during start-up, shutdown and maintenance. The assembly filters solid particles; it is not a moisture separator, steam trap, pressure regulator or steam generator.
Características clave
One cleanable sintered 316L stainless-steel cartridge
Choice of conservative 1, 5 or 25 µm cartridge grades
Hinged sanitary clamp for cartridge access
Opposing inline Tri-Clamp steam connections
Separate top vent and vertical low-point drain
Metallic filter medium suitable for repeated cleaning
Compact housing geometry with low internal hold-up
Preocupaciones del producto del cliente
Clean steam can acquire particulate contamination from generation and distribution surfaces, but the final filter must avoid excessive pressure drop, retained condensate and maintenance ambiguity.
Pipe scale or fabrication debris can reach a critical steam userInstall a selected sintered stainless cartridge immediately upstream of the user to retain the specified particle fraction without introducing fibrous media.
An undersized element creates avoidable pressure loss at peak steam demandSize the housing and micron grade from actual steam mass flow, pressure and allowable clean differential pressure rather than connection size alone.
Condensate held in the bowl can wet the element and disturb start-up flowUse the centered low-point drain and top vent to establish a controlled warm-up and drainage sequence for the installed orientation.
Cartridge inspection is delayed by complicated vessel disassemblyRelease the single hinged sanitary clamp to lift the compact head and withdraw the one-piece metal cartridge for inspection, cleaning or replacement.
Aplicaciones típicas
Clean steam supply to autoclaves and sterilizersSIP steam feeds for bioreactors and process vesselsControlled-environment clean-steam humidificationPharmaceutical equipment steam barriersFinal particulate protection upstream of hygienic steam users
Parámetros técnicos
The selected catalogue identity is a DN40 single-round housing with one 254 mm-class sintered cartridge. Final micron grade, steam capacity, seal compound, design pressure and connection standard are matched to the operating steam condition.
| Materiales Core | 316L stainless-steel housing with one sintered 316L stainless-steel cartridge and steam-service EPDM seals |
|---|---|
| Panel de espesor | Pressure-retaining bowl wall typically 2.0–3.0 mm for the selected single-round housing size |
| Ancho efectivo | 104 mm housing outside diameter in the selected DN40 single-round configuration |
| Longitud máxima | 538 mm overall height for the selected DN40 single-round configuration |
| Acero frente a espesor | Perforated cartridge guard and end-cap stock typically 1.0–2.0 mm |
| Densidad Core | 316L stainless steel density approximately 8000 kg/m³ |
| Conductividad térmica | 316L stainless steel approximately 15 W/(m·K) at 20°C |
| Superficie acabada | Internal contact surface electropolished to approximately 0.8 µm Ra; external surface polished and passivated |
| Tipo conjunto | DN40 sanitary Tri-Clamp inlet and outlet, single hinged clamp housing closure, capped top vent and bottom drain |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
1, 5 or 25 µm sintered stainless cartridge gradeAlternative single-round housing and cartridge lengthsSanitary Tri-Clamp, weld-end or compatible hygienic connectionsHigher-temperature steam-service seal compoundsAlternative vent and condensate-drain valve arrangementsElectropolished internal and external surface finishesInsulation jacket for personnel protectionDifferential-pressure take-off connections
Planning a Clean Steam Filter specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
