Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
Hệ thống tiện ích phòng sạch
Bộ lọc hơi nước sạch
A single-round 316L sanitary filter assembly that captures particulate contamination from clean steam through a removable sintered stainless-steel cartridge.
- Single 316L sintered cartridge
- Low-hold-up vented housing
- Drainable sanitary interfaces
Giới thiệu Sản phẩm
The Clean Steam Filter is an inline hygienic housing for final particulate control in clean-steam services feeding sterilizers, SIP circuits, humidifiers and sensitive process users. Steam enters the compact upper head, passes through one cylindrical sintered 316L cartridge and leaves through the opposing sanitary outlet while retained scale, weld residue and pipe-borne debris remain within the metallic depth structure. A clamp-secured two-piece housing permits direct cartridge access, and dedicated top-vent and bottom-drain connections help remove trapped air and condensate during start-up, shutdown and maintenance. The assembly filters solid particles; it is not a moisture separator, steam trap, pressure regulator or steam generator.
Các tính năng chính
One cleanable sintered 316L stainless-steel cartridge
Choice of conservative 1, 5 or 25 µm cartridge grades
Hinged sanitary clamp for cartridge access
Opposing inline Tri-Clamp steam connections
Separate top vent and vertical low-point drain
Metallic filter medium suitable for repeated cleaning
Compact housing geometry with low internal hold-up
Các mối quan tâm về sản phẩm của khách hàng
Clean steam can acquire particulate contamination from generation and distribution surfaces, but the final filter must avoid excessive pressure drop, retained condensate and maintenance ambiguity.
Pipe scale or fabrication debris can reach a critical steam userInstall a selected sintered stainless cartridge immediately upstream of the user to retain the specified particle fraction without introducing fibrous media.
An undersized element creates avoidable pressure loss at peak steam demandSize the housing and micron grade from actual steam mass flow, pressure and allowable clean differential pressure rather than connection size alone.
Condensate held in the bowl can wet the element and disturb start-up flowUse the centered low-point drain and top vent to establish a controlled warm-up and drainage sequence for the installed orientation.
Cartridge inspection is delayed by complicated vessel disassemblyRelease the single hinged sanitary clamp to lift the compact head and withdraw the one-piece metal cartridge for inspection, cleaning or replacement.
Các ứng dụng điển hình
Clean steam supply to autoclaves and sterilizersSIP steam feeds for bioreactors and process vesselsControlled-environment clean-steam humidificationPharmaceutical equipment steam barriersFinal particulate protection upstream of hygienic steam users
Thông số kỹ thuật
The selected catalogue identity is a DN40 single-round housing with one 254 mm-class sintered cartridge. Final micron grade, steam capacity, seal compound, design pressure and connection standard are matched to the operating steam condition.
| Vật liệu lõi | 316L stainless-steel housing with one sintered 316L stainless-steel cartridge and steam-service EPDM seals |
|---|---|
| Độ dày bảng điều khiển | Pressure-retaining bowl wall typically 2.0–3.0 mm for the selected single-round housing size |
| Chiều rộng hiệu quả | 104 mm housing outside diameter in the selected DN40 single-round configuration |
| Chiều dài tối đa | 538 mm overall height for the selected DN40 single-round configuration |
| Thép đối mặt với độ dày | Perforated cartridge guard and end-cap stock typically 1.0–2.0 mm |
| Mật độ lõi | Mật độ thép không gỉ 316L xấp xỉ 8000 kg / m3 |
| Độ dẫn nhiệt | 316L stainless steel approximately 15 W/(m·K) at 20°C |
| Kết thúc bề mặt | Internal contact surface electropolished to approximately 0.8 µm Ra; external surface polished and passivated |
| Loại khớp nối | DN40 sanitary Tri-Clamp inlet and outlet, single hinged clamp housing closure, capped top vent and bottom drain |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Các tùy chọn có sẵn
1, 5 or 25 µm sintered stainless cartridge gradeAlternative single-round housing and cartridge lengthsSanitary Tri-Clamp, weld-end or compatible hygienic connectionsHigher-temperature steam-service seal compoundsAlternative vent and condensate-drain valve arrangementsElectropolished internal and external surface finishesInsulation jacket for personnel protectionDifferential-pressure take-off connections
Planning a Clean Steam Filter specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.
