Sterility test isolator complete three-quarter view with four glove ports and transfer airlock

Оборудование для чистых помещений

Изолятор для испытания на стерильность

A compact aseptic laboratory isolator that controls sterility testing through HEPA airflow, automated H2O2 decontamination and integrated membrane-filtration workstations.

Controlled Test Environment
Integrated Filtration Pumps
Rapid H2O2 Cycle
Monitored Test Workflow

Запрос котировки Просмотреть продукты

Введение продукции

The sterility test isolator provides closed work chambers for membrane-filtration or direct-inoculation testing. Stainless construction, HEPA-controlled airflow and fixed glove access protect the test from room contamination, while a dedicated transfer airlock and automated hydrogen-peroxide cycle prepare incoming materials and internal surfaces. Integrated pumps, bottle racks and process monitoring support repeatable laboratory campaigns with fewer handling steps.

Основные характеристики

Independent HEPA-controlled chambers support organized sterility test workflows.

Integrated membrane-filtration pumps reduce loose equipment and tubing inside the chamber.

Automated H2O2 decontamination treats both work chamber and material airlock.

Continuous pressure, cycle and environmental monitoring supports documented operation.

Обеспокоенность клиентов продуктами

Sterility testing is vulnerable to false positives from environmental ingress and false negatives if decontamination residues are not adequately aerated.

Room-borne organisms can contaminate exposed test assemblies.A sealed HEPA-controlled barrier isolates samples and media from the laboratory background.

Complex material entry increases contamination risk and test delay.A dedicated airlock decontaminates organized loads before chamber transfer.

Loose pumps and tubing create clutter and cleaning difficulty.Integrated filtration pumps and fixed racks simplify setup and surface access.

Inconsistent cycle records weaken investigation traceability.Automated controls record pressure, decontamination and aeration parameters for each run.

Типичные приложения

Pharmaceutical batch-release sterility testingMembrane-filtration microbiology testsDirect-inoculation sterility testsAseptic quality-control sample handling

Технические параметры

Typical construction values for a modular pharmaceutical sterility test isolator are listed below.

Основной материал	316L stainless steel chambers with safety-glass windows and CSM or EPDM glove sleeves
Толщина панели	40-80 mm double-skin enclosure panels
эффективная ширина	1200-2800 mm test chamber width
Максимальная длина	Up to 4500 mm modular isolator length
Толщина линий стали	1.2-1.5 mm stainless steel skins
Плотность ядра	80-140 kg/m³ for sealed panel infill
Теплопроводимость	0.038-0.055 W/(m·K) for insulated panel infill
Поверхностная отделка	Satin 316L stainless steel with radiused, cleanable internal surfaces
Объединенный тип	Continuously welded chambers with gasketed windows, clamped HEPA housings and sealed transfer-airlock interface
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Membrane-filtration or direct-inoculation workstationPositive or negative pressure operationIntegrated particle counter and air samplerWireless glove testing and data reporting

Planning a Sterility Test Isolator specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой