Sterility test isolator complete three-quarter view with four glove ports and transfer airlock

산업별 클린룸 장비

멸균 테스트 격리기

A compact aseptic laboratory isolator that controls sterility testing through HEPA airflow, automated H2O2 decontamination and integrated membrane-filtration workstations.

Controlled Test Environment
Integrated Filtration Pumps
Rapid H2O2 Cycle
Monitored Test Workflow

견적 요청 제품 찾아보기

상품 소개

The sterility test isolator provides closed work chambers for membrane-filtration or direct-inoculation testing. Stainless construction, HEPA-controlled airflow and fixed glove access protect the test from room contamination, while a dedicated transfer airlock and automated hydrogen-peroxide cycle prepare incoming materials and internal surfaces. Integrated pumps, bottle racks and process monitoring support repeatable laboratory campaigns with fewer handling steps.

주요 기능

Independent HEPA-controlled chambers support organized sterility test workflows.

Integrated membrane-filtration pumps reduce loose equipment and tubing inside the chamber.

Automated H2O2 decontamination treats both work chamber and material airlock.

Continuous pressure, cycle and environmental monitoring supports documented operation.

고객 제품 관심사

Sterility testing is vulnerable to false positives from environmental ingress and false negatives if decontamination residues are not adequately aerated.

Room-borne organisms can contaminate exposed test assemblies.A sealed HEPA-controlled barrier isolates samples and media from the laboratory background.

Complex material entry increases contamination risk and test delay.A dedicated airlock decontaminates organized loads before chamber transfer.

Loose pumps and tubing create clutter and cleaning difficulty.Integrated filtration pumps and fixed racks simplify setup and surface access.

Inconsistent cycle records weaken investigation traceability.Automated controls record pressure, decontamination and aeration parameters for each run.

일반적인 응용 프로그램

Pharmaceutical batch-release sterility testingMembrane-filtration microbiology testsDirect-inoculation sterility testsAseptic quality-control sample handling

기술 매개변수

Typical construction values for a modular pharmaceutical sterility test isolator are listed below.

핵심 재료	316L stainless steel chambers with safety-glass windows and CSM or EPDM glove sleeves
패널 두께	40-80 mm double-skin enclosure panels
유효 폭	1200-2800 mm test chamber width
최대 길이	Up to 4500 mm modular isolator length
강철 면면 두께	1.2-1.5 mm stainless steel skins
코어 밀도	80-140 kg/m³ for sealed panel infill
열전도도 (Thermal Conductivity)	0.038-0.055 W/(m·K) for insulated panel infill
표면 마무리	Satin 316L stainless steel with radiused, cleanable internal surfaces
접합 유형	Continuously welded chambers with gasketed windows, clamped HEPA housings and sealed transfer-airlock interface
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Membrane-filtration or direct-inoculation workstationPositive or negative pressure operationIntegrated particle counter and air samplerWireless glove testing and data reporting

Planning a Sterility Test Isolator specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.