English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Одежда для чистых комнат, ИПП и расходные материалы
Повторное использование чистой комнаты одежды
A launderable full-body cleanroom garment designed for controlled reuse under a managed inspection, cleaning and processing program.
- Launderable low-lint polyester construction
- Adjustable cleanroom interfaces for repeated use
- Configurable fabric and processing compatibility
Введение продукции
The Reusable Cleanroom Garment uses continuous-filament polyester fabric and enclosed construction details to support repeated controlled-environment service. A stand collar, covered front zipper, adjustable wrists and ankles, and pocket-free panels provide a practical contamination-control profile. Conductive-grid fabric, integrated hood and footwear interfaces can be selected when required by the garment system.
Основные характеристики
Heat-sealed panel edges reduce exposed cut yarns inside seams
Covered front zipper supports routine gowning and removal
Adjustable wrist, ankle and neck interfaces accommodate system components
Garment identification can support laundering and inspection records
Обеспокоенность клиентов продуктами
Reusable apparel must retain fit, seam integrity and contamination-control function through its actual processing history. The garment specification therefore needs to align with laundering, sterilization, inspection and retirement procedures rather than relying on appearance alone.
Repeated processing can alter dimensions, closures or seam integrity.Select construction and trims compatible with the defined wash or sterilization cycle, then inspect critical interfaces after processing.
Untracked garments may remain in circulation after damage or contamination.Apply unique garment identification and maintain issue, process, repair and retirement records.
Loose panel edges or pockets can create particle-retention points.Use heat-sealed panel edges, enclosed seams and pocket-free styling for critical applications.
A fabric selected without regard to the processing method may age prematurely.Confirm fabric, conductive yarn and closure compatibility against the facility's actual processing conditions.
Типичные приложения
Used in semiconductor fabrication, electronics assembly, pharmaceutical support areas, medical-device manufacturing, optics, laboratories and precision production with an established reusable garment program.
Технические параметры
The values below describe conservative configurable ranges for a reusable polyester coverall. Final fabric mass, dimensions, seam construction and processing compatibility should be fixed in the approved garment specification.
| Основной материал | Continuous-filament polyester; optional integrated conductive yarn grid |
|---|---|
| Толщина панели | 0.22–0.50 mm |
| эффективная ширина | 520–790 mm per laid-flat garment section |
| Максимальная длина | 2050 mm |
| Толщина линий стали | 0 mm; no steel facing used |
| Плотность ядра | 75–150 kg/m³ apparent fabric bulk density |
| Теплопроводимость | 0.035–0.060 W/(m·K), material dependent |
| Поверхностная отделка | Smooth low-lint woven surface with heat-sealed panel edges |
| Объединенный тип | Enclosed sewn seams with covered zipper and adjustable cleanroom interfaces |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Standard polyester or conductive-grid polyester fabricStand collar or integrated hoodElastic, knitted or adjustable snap cuffsOpen ankle, adjustable ankle or integrated boot interfaceLight blue, white, navy, green or other standard garment colorsBarcode, data-matrix or RFID-compatible identification
Planning a Reusable Cleanroom Garment specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
