Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Vêtements de salle blanche, EPI et consommables
Vêtements Cleanroom réutilisables
A launderable full-body cleanroom garment designed for controlled reuse under a managed inspection, cleaning and processing program.
- Launderable low-lint polyester construction
- Adjustable cleanroom interfaces for repeated use
- Configurable fabric and processing compatibility
Introduction de produit
The Reusable Cleanroom Garment uses continuous-filament polyester fabric and enclosed construction details to support repeated controlled-environment service. A stand collar, covered front zipper, adjustable wrists and ankles, and pocket-free panels provide a practical contamination-control profile. Conductive-grid fabric, integrated hood and footwear interfaces can be selected when required by the garment system.
Key Features
Heat-sealed panel edges reduce exposed cut yarns inside seams
Covered front zipper supports routine gowning and removal
Adjustable wrist, ankle and neck interfaces accommodate system components
Garment identification can support laundering and inspection records
Préoccupations du client produit
Reusable apparel must retain fit, seam integrity and contamination-control function through its actual processing history. The garment specification therefore needs to align with laundering, sterilization, inspection and retirement procedures rather than relying on appearance alone.
Repeated processing can alter dimensions, closures or seam integrity.Select construction and trims compatible with the defined wash or sterilization cycle, then inspect critical interfaces after processing.
Untracked garments may remain in circulation after damage or contamination.Apply unique garment identification and maintain issue, process, repair and retirement records.
Loose panel edges or pockets can create particle-retention points.Use heat-sealed panel edges, enclosed seams and pocket-free styling for critical applications.
A fabric selected without regard to the processing method may age prematurely.Confirm fabric, conductive yarn and closure compatibility against the facility's actual processing conditions.
Les applications typiques
Used in semiconductor fabrication, electronics assembly, pharmaceutical support areas, medical-device manufacturing, optics, laboratories and precision production with an established reusable garment program.
Paramètres techniques
The values below describe conservative configurable ranges for a reusable polyester coverall. Final fabric mass, dimensions, seam construction and processing compatibility should be fixed in the approved garment specification.
| Matériaux de base | Continuous-filament polyester; optional integrated conductive yarn grid |
|---|---|
| Panneau épaisseur | 0.22–0.50 mm |
| Largeur effective | 520–790 mm per laid-flat garment section |
| Longueur maximale | 2050 mm |
| Acier face épaisseur | 0 mm; no steel facing used |
| Densité Core | 75–150 kg/m³ apparent fabric bulk density |
| Conductivité thermique | 0.035–0.060 W/(m·K), material dependent |
| surface finie | Smooth low-lint woven surface with heat-sealed panel edges |
| Type joint | Enclosed sewn seams with covered zipper and adjustable cleanroom interfaces |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Standard polyester or conductive-grid polyester fabricStand collar or integrated hoodElastic, knitted or adjustable snap cuffsOpen ankle, adjustable ankle or integrated boot interfaceLight blue, white, navy, green or other standard garment colorsBarcode, data-matrix or RFID-compatible identification
Planning a Reusable Cleanroom Garment specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
