English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Обработка и хранение материалов в чистых помещениях
Корзина передачи отрицательного давления
A sealed mobile negative-pressure cart for contained transfer of contamination-risk materials between controlled processing areas.
- Inward airflow helps contain airborne material during transport
- HEPA-filtered exhaust protects surrounding controlled areas
- Differential-pressure monitoring provides visible containment status
Введение продукции
This cart combines a welded stainless enclosure, gasketed access doors, adjustable shelves and a fan-driven HEPA exhaust module. The fan maintains the chamber below ambient pressure so leakage airflow is directed inward, while analog and digital pressure indication helps operators verify containment during loading and movement.
Основные характеристики
Gasketed doors and compression latches reduce uncontrolled leakage paths.
Pressure indication and alarm hardware make operating status apparent.
Onboard battery maintains containment during mobile transfers.
Perforated removable shelves promote an unobstructed internal airflow path.
Обеспокоенность клиентов продуктами
Potentially contaminated loads must remain enclosed during movement while the surrounding controlled area is protected from outward leakage.
Particles escaping through cabinet gapsNegative pressure directs leakage airflow into the enclosure.
Contaminated exhaust reaching the corridorThe discharge stream passes through a dedicated HEPA filter.
Loss of containment going unnoticedDifferential-pressure display and alarm devices show system condition.
Power interruption during movementA rechargeable battery supports the exhaust fan between mains connections.
Типичные приложения
Contained internal transfer of potent-compound containers, laboratory samples, quarantine materials and closed waste packages in pharmaceutical, biotechnology and research facilities.
Технические параметры
Containment pressure, exhaust volume, filter arrangement and alarm limits are selected from a risk assessment of the handled material. The cabinet uses cleanable stainless surfaces, accessible filter housings and a mobile power system; final performance remains configurable for the intended protocol.
| Основной материал | Type 316L stainless steel enclosure with HEPA exhaust module and polycarbonate vision panels |
|---|---|
| Толщина панели | 30–50 mm sealed double-wall enclosure sections |
| эффективная ширина | 600–1000 mm usable chamber width |
| Максимальная длина | Up to 1500 mm overall cart length |
| Толщина линий стали | 1.2–2.0 mm |
| Плотность ядра | 8000 kg/m³ nominal 316L stainless steel density |
| Теплопроводимость | Approximately 14.6 W/(m·K) at room temperature |
| Поверхностная отделка | No. 4 brushed, weld-smoothed and passivated stainless steel |
| Объединенный тип | Seam-welded cabinet with gasketed compression-latched doors and sealed HEPA exhaust housing |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Single or redundant HEPA exhaust, bag-in/bag-out filter housing, extended battery capacity, audible alarms, data logging, docking interfaces and custom shelf configurations.
Planning a Negative Pressure Transfer Cart specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
