영어
독일어
아랍어
프랑스어
인도네시아어
일본어
한국어현재 Current
말레이어
포르투갈어
러시아어
스페인어
태국어
터키어
베트남어
클린룸 재료 취급 및 보관
음압 전송 카트
A sealed mobile negative-pressure cart for contained transfer of contamination-risk materials between controlled processing areas.
- Inward airflow helps contain airborne material during transport
- HEPA-filtered exhaust protects surrounding controlled areas
- Differential-pressure monitoring provides visible containment status
상품 소개
This cart combines a welded stainless enclosure, gasketed access doors, adjustable shelves and a fan-driven HEPA exhaust module. The fan maintains the chamber below ambient pressure so leakage airflow is directed inward, while analog and digital pressure indication helps operators verify containment during loading and movement.
주요 기능
Gasketed doors and compression latches reduce uncontrolled leakage paths.
Pressure indication and alarm hardware make operating status apparent.
Onboard battery maintains containment during mobile transfers.
Perforated removable shelves promote an unobstructed internal airflow path.
고객 제품 관심사
Potentially contaminated loads must remain enclosed during movement while the surrounding controlled area is protected from outward leakage.
Particles escaping through cabinet gapsNegative pressure directs leakage airflow into the enclosure.
Contaminated exhaust reaching the corridorThe discharge stream passes through a dedicated HEPA filter.
Loss of containment going unnoticedDifferential-pressure display and alarm devices show system condition.
Power interruption during movementA rechargeable battery supports the exhaust fan between mains connections.
일반적인 응용 프로그램
Contained internal transfer of potent-compound containers, laboratory samples, quarantine materials and closed waste packages in pharmaceutical, biotechnology and research facilities.
기술 매개변수
Containment pressure, exhaust volume, filter arrangement and alarm limits are selected from a risk assessment of the handled material. The cabinet uses cleanable stainless surfaces, accessible filter housings and a mobile power system; final performance remains configurable for the intended protocol.
| 핵심 재료 | Type 316L stainless steel enclosure with HEPA exhaust module and polycarbonate vision panels |
|---|---|
| 패널 두께 | 30–50 mm sealed double-wall enclosure sections |
| 유효 폭 | 600–1000 mm usable chamber width |
| 최대 길이 | Up to 1500 mm overall cart length |
| 강철 면면 두께 | 1. 2 - 2. 0 cm |
| 코어 밀도 | 8000 kg / m 3 공칭 316 L 스테인레스 스틸 밀도 |
| 열전도도 (Thermal Conductivity) | 실온에서 약 14. 6 W / (m · K) |
| 표면 마무리 | No. 4 브러시, 용접 부드럽게 및 패시브레이트 스테인레스 스틸 |
| 접합 유형 | Seam-welded cabinet with gasketed compression-latched doors and sealed HEPA exhaust housing |
| 사용자 정의 | 의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다. |
사용 가능한 옵션
Single or redundant HEPA exhaust, bag-in/bag-out filter housing, extended battery capacity, audible alarms, data logging, docking interfaces and custom shelf configurations.
Planning a Negative Pressure Transfer Cart specification?
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.
