Mobile UV-C disinfection trolley with stainless base and deployed lamp arms

Освещение и электрическое оборудование в чистых помещениях

Мобильная лампа УФ-дезинфекции

A wheeled UV-C treatment unit with protected lamp arms, programmable cycle control and safeguards for repositioning between unoccupied rooms.

Fold-Out UV-C Lamp Arms
Lockable 360-Degree Casters
Programmable Treatment Timer
Key and Motion Safeguards

Запрос котировки Просмотреть продукты

Введение продукции

The mobile trolley places multiple UV-C lamps on one or two vertical folding arms above a stable stainless base. Four swivel casters allow the unit to be positioned in different rooms, while key control, delayed start, audible warning and optional motion sensors support a controlled unoccupied treatment cycle. Lamp shields or folding panels protect the quartz tubes during transport and storage.

Основные характеристики

Opposed lamp arms extend the line-of-sight coverage from one central position.

A delayed start gives the operator time to leave before the cycle begins.

Lockable casters stabilize the trolley after placement.

An audible alert and active indicator distinguish treatment from standby.

Folding protective arms shield fragile lamps when the cart is moved.

Обеспокоенность клиентов продуктами

A mobile UV-C device must balance broad exposure geometry with safe transport, stable placement and controlled operation.

One lamp face leaves large areas shadowed behind equipment.Multiple outward-facing arms distribute irradiation in several directions.

The trolley rolls or tips when placed on a sloped floor joint.A low weighted base and individual caster brakes stabilize the unit.

Quartz lamps break during movement between rooms.Fold-in guards protect the lamps within the trolley outline during transport.

An accidental entry can expose personnel during a cycle.Key control, warning delay and optional motion interruption support restricted operation.

Типичные приложения

Terminal room treatmentLaboratory surface cyclesGowning room treatmentUnoccupied equipment bays

Технические параметры

Typical configurable construction ranges for a mobile UV-C disinfection trolley are listed below.

Основной материал	SUS304 base and column with UV-resistant polymer controls, UV-C lamps, reflectors and electronic timer
Толщина панели	1.0-2.0 mm formed enclosure panels over the weighted base
эффективная ширина	350-650 mm deployed trolley footprint
Максимальная длина	Up to 1600 mm overall operating height
Толщина линий стали	1.0-1.5 mm SUS304 body and lamp-arm covers
Плотность ядра	Approximately 7900-8000 kg/m³ for the stainless structure
Теплопроводимость	14-16 W/(m·K) for the stainless enclosure
Поверхностная отделка	Fine-brushed stainless body with black controls, amber warning light and clear lamp shields
Объединенный тип	Folding lamp-arm hinges with retained guards, enclosed cable routing and lockable caster mounts
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Single- or dual-arm arrangementRemote controlMotion-sensor interruption15-120 minute programmable timer

Planning a Mobile UV Disinfection Lamp specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой